Pass4sure ST0-148 Study Guide with unconditional promise | | Inicio RADIONAVES

Have a look at killexams.com complete Pass4sure ST0-148 questions and answers - study guide - practice test - and braindumps provided at website - - Inicio RADIONAVES

Pass4sure ST0-148 dumps | Killexams.com ST0-148 actual questions | http://www.radionaves.com/

ST0-148 Administration of Veritas Storage(R) Foundation 6.0 for Unix Technical Assessment

Study guide Prepared by Killexams.com Symantec Dumps Experts

Exam Questions Updated On :



Killexams.com ST0-148 Dumps and actual Questions

100% actual Questions - Exam Pass Guarantee with tall Marks - Just Memorize the Answers



ST0-148 exam Dumps Source : Administration of Veritas Storage(R) Foundation 6.0 for Unix Technical Assessment

Test Code : ST0-148
Test designation : Administration of Veritas Storage(R) Foundation 6.0 for Unix Technical Assessment
Vendor designation : Symantec
: 109 actual Questions

I sense very assured with ST0-148 exam bank.
Just cleared ST0-148 exam with top score and Have to thank killexams.com for making it possible. I used ST0-148 exam simulator as my primary information source and got a solid passing score on the ST0-148 exam. Very reliable, Im delighted I took a leap of faith purchasing this and trusted killexams. Everything is very professional and reliable. Two thumbs up from me.


i discovered the whole thing had to spotless ST0-148 exam.
The material was typically prepared and green. I ought to without a obliging deal of a stretch bear in brain severa solutionsand score a 97% marks after a 2-week preparation. a whole lot way to you parents for first rate associationmaterials and assisting me in passing the ST0-148 exam. As a opemarks mother, I had limited time to accomplish my-self snare ready for the exam ST0-148. Thusly, i used to live looking for a few exact material and the killexams.com dumps aide changed into the prerogative decision.


Found an genuine source for actual ST0-148 exam questions.
I simply required telling you that i Have topped in ST0-148 exam. each and every the questions about exam table had been from killexams. its miles said to live the actual helper for me at the ST0-148 exam bench. each and every reward of my achievement goes to this manual. this is the actual intuition behind my fulfillment. It guided me in the usurp manner for attempting ST0-148 exam questions. With the assist of this test stuff i used to live expert to exertion to each and every of the questions in ST0-148 exam. This examine stuff guides a person within the prerogative way and guarantees you a hundred% accomplishment in exam.


New Syllabus ST0-148 examination prep commemorate manual with questions are provided here.
I handed this exam with killexams.com and duty these days received my ST0-148 certificates. I did each and every my certifications with killexams.com, so I cant evaluate what its want to select an exam with/without it. But, the fact that I hold coming lower returned for his or her bundles suggests that Im lighthearted with this exam answer. I clearly affection being capable of exercise on my pc, in the solace of my home, particularly at the identical time as the stout majority of the questions performing at the exam are precisely the equal what you noticed to your exam simulator at home. Thanks to killexams.com, I were given as lots as the professional level. I am no longer high-quality whether sick live touching up any time quickly, as I emerge to live delighted wherein i am. Thank you Killexams.


Weekend Study is enough to pass ST0-148 exam with I got.
I just purchased this ST0-148 braindump, as soon as I heard that killexams.com has the updates. Its true, they Have included each and every new areas, and the exam looks very fresh. Given the recent update, their turn around time and support is excellent.


Need updated brain dumps for ST0-148 exam? Here it is.
I still select into account the tough time I had even as mastering for the ST0-148 exam. I used to are in search of for hearten from friends, but I felt most of the material Have become indistinct and crushed. Later, i organize killexams.com and its material. Thru the treasured material I determined everything from top to backside of the provided dump. It arrive to live so particular. Within the given questions, I replied each and every questions with consummate option. Thank you for brining each and every the endless happiness in my profession.


Study experts question bank and dumps to Have considerable success.
extraordinarily beneficial. It helped me pass ST0-148 , specially the exam simulator. I am lighthearted i was prepared for these hints. thanks killexams.com.


Dont forget to try these actual exam questions for ST0-148 exam.
I passed the ST0-148 exam three days back, I used killexams.com dumps for preparing and I could successfully complete the exam with a tall score of 98%. I used it for over a week, memorized each and every questions and their answers, so it became effortless for me to imprint the prerogative answers during the live exam. I thank the killexams.com team for helping me with such a wonderful training material and granting success.


Dont forget to try these actual exam questions for ST0-148 exam.
are you able to odor the candy perfume of victory I know i will and its miles simply a completely lovely smell. you may smell it too if you fade online to this killexams.com if you want to set aside together for your ST0-148 test. I did the identical ingredient prerogative earlier than my test and turned into very delighted with the provider provided to me. The centers prerogative here are impeccable and once you are in it you wouldnt live concerned approximately failing in any respect. I didnt fail and did quite nicely and so are you able to. try it!


Passing ST0-148 examination turned into my first revel in however terrific enjoy!
No matter having a complete-time mission along aspect own family obligations, I decided to sit down for the ST0-148 exam. And i used to live looking for clean, quick and strategic guiding principle to accomplish spend of 12 days time before exam. I were given these kinds of in killexams.com . It contained concise solutions that were smooth to dont forget. Thanks masses.


Symantec Administration of Veritas Storage(R)

Heavy power on Symantec as it Seeks a brand new CEO | killexams.com actual Questions and Pass4sure dumps

First name: ultimate identify: electronic mail handle: Password: verify Password: Username:

Title: C-level/President manager VP staff (associate/Analyst/and so forth.) Director

feature:

role in IT decision-making manner: Align company & IT goals Create IT strategy assess IT needs control vendor Relationships evaluate/Specify brands or companies different role license Purchases not worried

Work mobile: enterprise: company dimension: industry: street tackle metropolis: Zip/postal code State/Province: country:

once in a while, they send subscribers particular offers from opt for companions. Would you want to receive these special companion presents via email? yes No

Your registration with Eweek will encompass prerogative here free e-mail newsletter(s): tidings & Views

by way of submitting your wireless number, you correspond that eWEEK, its connected properties, and supplier companions proposing content you view may contact you the usage of contact headquarters expertise. Your consent is not required to view content material or spend web site elements.

by way of clicking on the "Register" button below, I correspond that I actually Have cautiously study the phrases of service and the privateness coverage and i conform to live legally inescapable through each and every such phrases.

Register

continue without consent      

partners Cheer The genuine time limit Of Symantec slit up | killexams.com actual Questions and Pass4sure dumps

more than a year after the choice to split turned into revealed, and after a prolong and a cost adjustment, Symantec has officially closed on its separation from storage company Veritas, headed into the weekend as a totally concentrated protection enterprise.

The sale of Veritas to inner most equity enterprise The Carlyle community officially completed at Friday's stock market shut, inserting $5.three billion in after-tax proceeds in the safety business's pockets.

companions cheered the information that the split process turned into officially at the back of Symantec. while the tidings wasn't a shock, with the sale time limit regularly occurring neatly in develop and both divisions already working independently, partners said the reputable closing capability Symantec can now dedicate each and every of its attention to riding its strategic vision for security.

[Related: 10 Things To hope From Symantec In Coming Months]

"Symantec has each and every these eyes on them for this massive split. … I reflect getting this done allows them to fade back to being strategic," stated Steve Barone, CEO at CBI, a Ferndale, Mich.-based mostly Symantec companion.

Wade Wyant, president and founder of stately Rapids, Mich.-based mostly ITS partners, spoke of he "could not live happier" with the business's determination to slit up and appears forward to Symantec executing on its protection mode now that the split is comprehensive.

"This split has been extraordinary," Wyant mentioned. "or not it's truly allowed them to focal point and we're delighted about it."

The procedure of splitting Symantec in two begun back in October 2014, when the Mountain View, Calif.-primarily based enterprise first printed its protest to rupture up from its storage business, Veritas. This past August, the enterprise spoke of, in its set of conveniently splitting the company, it will live promoting Veritas to The Carlyle neighborhood for $eight billion. the two companies each and every started working independently in October 2015.

for the intuition that then, the company pushed back the anticipated immediate date of the acquisition from Jan. 1 to Jan. 29, and lowered its sale cost from $8 billion to $7.4 billion.

John Thompson, Symantec world vice chairman of companion and channel income, referred to the slit up finalization is a "big deal" for the vendor and clears a course for it to focus on its Unified safety approach. He said Symantec personnel did most of their celebrating of the operational rupture up in October, however that "there remains singing and dancing in the hallways nowadays."

"today marks a new first light for Symantec and its companions," Thompson spoke of. "Symantec has completed the sale of Veritas and now they are fully concentrated on cybersecurity. I believe it truly is going to live obliging for partners and obliging for Symantec."

Now that the split is finished, partners pointed out, they wish to espy Symantec ramp up its know-how investments. it's a shove the dealer has already begun, rolling out pretty much a dozen new safety products in recent months. ITS partners’ Wyant stated he would affection to espy Symantec investing in each R&D and acquisitions because it grows its technology portfolio.

"The channel is barely anticipating even more high-quality products," Wyant pointed out. "Symantec has a very obliging brand, they Have loads of splendid valued clientele. … in the event that they extend their product set and proceed to innovate, then they are able to each and every live successful and the customer can snare loads of price."

that is exactly what partners can predict, Thompson pointed out, with deliberate investments in expertise, each organically and thru acquisition. He said partners can furthermore are expecting extra investments within the channel, especially around safety-focused companions, the SecureOne confederate application, accomplice engage movements, training and enablement, and accomplice Enablement useful resource Kits. Having the rupture up finished will accelerate the company's momentum in each and every of those areas, he talked about, because it is in a position to completely focus on its safety investments.

"We're looking forward to transforming into even more with companions as they flood forward," Thompson mentioned. "We feel modern-day announcement does imprint a brand new daybreak for us and a new dawn for partners."


Will Symantec improvement by way of setting apart Its Storage application enterprise? | killexams.com actual Questions and Pass4sure dumps

No outcomes found, are attempting new key phrase!R&D teams from Veritas and Symantec operated independently for just about three years post-merger, when code sharing and product line integration began taking area. [2] From an trade standpoint, the ...

Unquestionably it is arduous assignment to pick dependable certification questions/answers assets regarding review, reputation and validity since individuals snare sham because of picking incorrectly benefit. Killexams.com ensure to serve its customers best to its assets concerning exam dumps update and validity. The vast majority of other's sham report dissension customers arrive to us for the brain dumps and pass their exams joyfully and effortlessly. They never trade off on their review, reputation and trait on the grounds that killexams review, killexams reputation and killexams customer conviction is imperative to us. Uniquely they deal with killexams.com review, killexams.com reputation, killexams.com sham report objection, killexams.com trust, killexams.com validity, killexams.com report and killexams.com scam. On the off casual that you espy any fallacious report posted by their rivals with the designation killexams sham report grievance web, killexams.com sham report, killexams.com scam, killexams.com protest or something affection this, simply bethink there are constantly destitute individuals harming reputation of obliging administrations because of their advantages. There are a huge number of fulfilled clients that pass their exams utilizing killexams.com brain dumps, killexams PDF questions, killexams hone questions, killexams exam simulator. Visit Killexams.com, their specimen questions and test brain dumps, their exam simulator and you will realize that killexams.com is the best brain dumps site.

Back to Braindumps Menu


CTAL-TA study guide | HP0-022 cram | P2140-020 exam prep | C2030-102 exercise questions | 310-813 dumps questions | HH0-400 exercise test | 000-N01 brain dumps | CFA-Level-III braindumps | HP0-S11 actual questions | HC-711-CHS questions and answers | IBMSPSSMBPDM free pdf | HP0-242 exercise test | 000-259 examcollection | 77-881 free pdf | HP0-Y39 study guide | 310-345 test questions | 000-348 cheat sheets | C9020-463 dump | Hadoop-PR000007 bootcamp | 9A0-802 brain dumps |


Review ST0-148 actual question and answers before you select test
killexams.com furnish latest and refreshed exercise Test with Actual Exam Questions and Answers for new syllabus of Symantec ST0-148 Exam. exercise their actual Questions and Answers to improve your insight and pass your exam with tall Marks. They guarantee your accomplishment in the Test Center, covering each one of the references of exam and develop your erudition of the ST0-148 exam. Pass past any uncertainty with their braindumps.

At killexams.com, they provide thoroughly reviewed Symantec ST0-148 exactly identical Questions and Answers that are just required for Passing ST0-148 test, and to snare certified by Symantec. They really hearten people improve their erudition to memorize the and certify. It is a best choice to accelerate your career as a professional in the Industry. Click http://killexams.com/pass4sure/exam-detail/ST0-148 killexams.com supercilious of their reputation of helping people pass the ST0-148 test in their very first attempts. Their success rates in the past two years Have been absolutely impressive, thanks to their delighted customers who are now able to boost their career in the swiftly lane. killexams.com is the number one choice among IT professionals, especially the ones who are looking to climb up the hierarchy levels faster in their respective organizations. killexams.com Huge Discount Coupons and Promo Codes are as under;
WC2017 : 60% Discount Coupon for each and every exams on website
PROF17 : 10% Discount Coupon for Orders greater than $69
DEAL17 : 15% Discount Coupon for Orders greater than $99
DECSPECIAL : 10% Special Discount Coupon for each and every Orders

At killexams.com, they provide thoroughly reviewed Symantec ST0-148 training resources which are the best for Passing ST0-148 test, and to snare certified by Symantec. It is a best choice to accelerate your career as a professional in the Information Technology industry. They are supercilious of their reputation of helping people pass the ST0-148 test in their very first attempts. Their success rates in the past two years Have been absolutely impressive, thanks to their delighted customers who are now able to boost their career in the swiftly lane. killexams.com is the number one choice among IT professionals, especially the ones who are looking to climb up the hierarchy levels faster in their respective organizations. Symantec is the industry leader in information technology, and getting certified by them is a guaranteed way to succeed with IT careers. They hearten you finish exactly that with their tall trait Symantec ST0-148 training materials.

Symantec ST0-148 is omnipresent each and every around the world, and the commerce and software solutions provided by them are being embraced by almost each and every the companies. They Have helped in driving thousands of companies on the sure-shot path of success. Comprehensive erudition of Symantec products are required to certify a very censorious qualification, and the professionals certified by them are highly valued in each and every organizations.

We provide actual ST0-148 pdf exam questions and answers braindumps in two formats. Download PDF & exercise Tests. Pass Symantec ST0-148 actual Exam quickly & easily. The ST0-148 braindumps PDF type is available for reading and printing. You can print more and exercise many times. Their pass rate is tall to 98.9% and the similarity percentage between their ST0-148 study guide and actual exam is 90% based on their seven-year educating experience. finish you want achievements in the ST0-148 exam in just one try?

Cause each and every that matters here is passing the ST0-148 - Administration of Veritas Storage(R) Foundation 6.0 for Unix Technical Assessment exam. As each and every that you necessity is a tall score of Symantec ST0-148 exam. The only one thing you necessity to finish is downloading braindumps of ST0-148 exam study guides now. They will not let you down with their money-back guarantee. The professionals furthermore withhold pace with the most up-to-date exam in order to present with the the majority of updated materials. Three Months free access to live able to them through the date of buy. Every candidates may afford the ST0-148 exam dumps via killexams.com at a low price. Often there is a discount for anyone all.

In the presence of the genuine exam content of the brain dumps at killexams.com you can easily develop your niche. For the IT professionals, it is vital to enhance their skills according to their career requirement. They accomplish it effortless for their customers to select certification exam with the hearten of killexams.com verified and genuine exam material. For a shimmering future in the world of IT, their brain dumps are the best option.

killexams.com Huge Discount Coupons and Promo Codes are as under;
WC2017 : 60% Discount Coupon for each and every exams on website
PROF17 : 10% Discount Coupon for Orders greater than $69
DEAL17 : 15% Discount Coupon for Orders greater than $99
DECSPECIAL : 10% Special Discount Coupon for each and every Orders


A top dumps writing is a very censorious feature that makes it effortless for you to select Symantec certifications. But ST0-148 braindumps PDF offers convenience for candidates. The IT certification is quite a difficult task if one does not find proper guidance in the contour of genuine resource material. Thus, they Have genuine and updated content for the preparation of certification exam.

ST0-148 | ST0-148 | ST0-148 | ST0-148 | ST0-148 | ST0-148


Killexams VCS-220 exam prep | Killexams 9A0-080 exam questions | Killexams C2150-196 sample test | Killexams 70-562-CSharp free pdf download | Killexams NSE6 brain dumps | Killexams CPIM questions and answers | Killexams HP0-M34 questions answers | Killexams 000-712 study guide | Killexams 000-015 bootcamp | Killexams HP2-N37 questions and answers | Killexams HP0-J47 test prep | Killexams 1Z0-070 dump | Killexams 000-765 brain dumps | Killexams 4H0-004 dumps | Killexams HP2-B100 actual questions | Killexams 642-243 test prep | Killexams 920-344 exercise questions | Killexams HP0-094 actual questions | Killexams 644-066 actual questions | Killexams A2010-598 cram |


Exam Simulator : Pass4sure ST0-148 Exam Simulator

View Complete list of Killexams.com Brain dumps


Killexams PCNSE study guide | Killexams C9560-023 exercise test | Killexams COG-701 pdf download | Killexams ST0-236 mock exam | Killexams 000-375 questions and answers | Killexams HP0-S27 cheat sheets | Killexams 000-649 exercise questions | Killexams EE0-503 brain dumps | Killexams 650-665 braindumps | Killexams MSC-235 examcollection | Killexams C2040-440 exercise test | Killexams A2090-719 free pdf download | Killexams 650-968 test prep | Killexams C9020-662 study guide | Killexams 77-605 sample test | Killexams ASC-029 brain dumps | Killexams 7595X test prep | Killexams 000-638 study guide | Killexams 000-752 exam questions | Killexams C9560-574 questions and answers |


Administration of Veritas Storage(R) Foundation 6.0 for Unix Technical Assessment

Pass 4 sure ST0-148 dumps | Killexams.com ST0-148 actual questions | http://www.radionaves.com/

Product Watch: Intel Intros 550 MHz PIII. AMD Cuts Chip Prices. SGI & Veritas Team on JFS for Linux. | killexams.com actual questions and Pass4sure dumps

SHORT TAKES

INTEL INTROS 550 MHz PENTIUM III PROCESSOR

Santa Clara, CA — Intel Corporation introduced the 550 MHz Intel Pentium III processor. The Pentium III processor is designed to power an Internet experience filled with rich audio, video, animations and 3-D that accomplish information arrive alive. The 550 MHz Pentium III processor is available now in volume and is in systems from several major PC manufacturers, as well as in a boxed format from Intel product dealers and resellers.

For users who interact with the Internet or data-rich applications, the most censorious advances are the Pentium III processor’s tall clock speed and its Internet Streaming SIMD Extensions – 70 new instructions that dramatically enhance the performance of advanced imaging, 3-D, streaming audio, video, and speech recognition applications. With each and every the power needed for the next generation of Internet-enabled software, Pentium III processors will continue to deliver an exceptional experience for PC users well into the future. The Pentium III processor at 550 MHz is 108 percent faster than the Intel Pentium II processor at 450 MHz on CPU intensive 3-D calculations, as shown by Ziff-Davis’ 3D WinBench 99 transform and lighting test. Using Futuremark’s MultimediaMark multimedia performance benchmark, the Pentium III processor at 550 MHz is 53 percent faster than the 450 MHz Pentium II processor. For more information on Pentium III processor performance visit http://www.intel.com/procs/perf

AMD CUTS CHIP PRICES

San Diego, CA — As Michael Kanellos reported for CNET News.com, AMD slashed its processor prices by 18 to 45 percent during the weekend, according to sources, matching similar price cuts by Intel on its Celeron and Pentium III lines.

The steep discounts on each and every of AMD’s K6-III and K6-2 chips arrive during a year of drastic price reductions on PC processors, which in turn has lead to fabulous deals for consumers, especially in the sub-$1,000 PC market. This weekend’s cuts followed a round of discounts imposed a month ago and will no doubt live followed by further cuts in July and September as Intel is expected to slit its prices again in those months.

SGI & VERITAS TEAM ON DVPT OF JFS FOR LINUX

Mountain View, CA — Recognizing the necessity to enhance the robust, enterprise features of Linux, SGI and VERITAS Software Corporation, the two leaders in file system technology, announced they are working together to provide a converged file system solution for the Linux operating system.

“The lack of a journaled file system is the number one issue facing the Linux community,” said John R. “Beau” Vrolyk, senior vice president, Computer Systems commerce Unit, SGI. “That fact that two industry leaders are working to bring the best of their respective file systems together will result in a better solution than either company could Have delivered separately. This furthermore avoids the fragmentation, which happened in the broader UNIX community and will Have a very positive impact on the future of Linux.”

FUJITSU’S FIRESTREAM 155 ATM SAR NOW IN PRODUCTION

London, England — Fujitsu Microelectronics announced that the MB86697A FireStream 155 ATM SAR is now in production. The device supports each and every common ATM services classes, including Available Bit Rate (ABR) and meets the requirements of ATM traffic management TM4.0. Features involve a high-performance PCI v2.1 system bus and a elastic UTOPIA-based cell stream interface supporting both level 1 and level 2 operation. The flexibility of this cell-stream interface, combined with its rich feature set, accomplish the device model for many ATM applications including ATM switches, access units, network interface cards and multi-protocol hubs, routers and bridges.

Support for the FireStream 155 includes comprehensive application notes and a Customer progress Kit (CDK). The CDK comprises a single, half-length 5V PCI Network Interface Card and supporting software including comprehensive C/C++ drivers, and Windows 95/98 and NT based applications. plenary documentation is provided including schematics and layout information. This kit provides the user with a complete reference design, reducing time to market for many applications. The MB86697A FireStream 155 device and DK86697 Customer progress Kit (CDK) are available now. List price is $55 for the FireStream 155 device in 10k quantities and $690 for the CDK. For more information visit http://www.fujitsu-ede.com

OBJECTARX COURSE TEACHES AUTOCAD PROGRAMMING IN C++

San Diego, CA — Ransen Software announces Ransen’s ObjectARX Course, a multimedia CD-ROM that teaches you how to program AutoCAD 2000 and AutoCAD 14 in C++. This self- paced course consists of 20 chapters, a hearten file and many complete source code examples. The course takes you step by step though creating applications for AutoCAD using Autodesk’s ObjectARX programming libraries.

Ransen’s ObjectARX Course was devised by Owen Ransen, a registered AutoCAD applications developer who is furthermore the author of “Programming AutoCAD in C/C++” (Wiley and Sons 1997). Having faced the identical problems that other real-world developers face, he saw a necessity for a universal and useful way of introducing AutoCAD C++ programming since the official Autodesk documentation is very minute but sometimes too much so. Ransen’s ObjectARX Course offers tutorials, practical examples, and hearten files written in a programmer-friendly language. For more information visit http://www.ransen.com

LACIE EXTENDS ITS SHAREABLE NETWORK CD STORAGE SOLUTION RANGE

San Diego, CA — As TELECOMWORLDWIRE reported, LaCie has released CD NetBox and NetTower, two new products in its NetCD compass of network CD solutions. CD NetBox, a Network Attached Storage device, enables users to accomplish data on CDs available to each and every users connected to a network, with up to 27 CDs of 650Mb each able to live shared at any one time.

CD NetBox/NetTower allows users to copy data from the CD to a disk, efface portions of or the whole CD and set password and access rights. Both are compatible with Netware, Unix, OS/2, Windows 95/98/NT and DOS and are Y2K compliant. CD NetBox and Tower are available immediately at prices starting from GBP1,395+VAT depending on the configuration chosen.

ACER SERVERS CERTIFIED FOR RED HAT LINUX 6.0

San Jose, CA — Acer Inc. has been certified for Red Hat Linux 6.0 on Acer Altos 1100 servers. Certification assures Linux compatibility with Acer Altos 1100 servers and allows users to select plenary odds of powerful Linux 6.0 symmetric multiprocessor (SMP) support and other new features of this release. The Acer Altos 1100 is the first Acer Altos server to live certified for Linux 6.0, with more models to follow.

“This certification assures Acer Altos resellers that their customers can select plenary odds of Linux 6.0 SMP capabilities,” said Fred Oh, director of server product management for Acer America Corp., a subsidiary of Acer Inc. “It furthermore demonstrates the ability of Acer Altos servers to accomplish in multiple operating environments. For more information visit http://www.acer.com/

SGI ANNOUNCES SUPPORT FOR NEW PENTIUM III

Mountain View, CA — SGI, announced support for Intel’s new 550MHz Pentium III processor for its new Silicon Graphics 320 visual workstation based on Windows NT operating system. With the improved performance of the 550MHz processor, Silicon Graphics 320 continues to proffer customers the most advanced power and graphics capabilities at mainstream desktop system pricing.

“With the ability to support dual- and single-processor configurations, the Silicon Graphics 320 visual workstation utilizes the performance improvements of the 550MHz Pentium III processor to deliver high-end visual computing on the desktop,” said Miguel Daud, director of marketing for Intel’s Workstation Products Group.

EMC & VERITAS publish NEW STORAGE MGMT SOFTWARE SOLUTIONS

Hopkinton, MA — EMC Corporation and VERITAS Software Corporation announced two new software solutions, developed by VERITAS Software for EMC, that will enable customers to better manage and protect their censorious UNIX and Windows NT-based information residing on EMC Symmetrix Enterprise Storage systems. The two new products, EMC Foundation Suite by VERITAS and EMC Database Edition for Oracle by VERITAS, integrate VERITAS Volume Manager (VxVM) and VERITAS File System (VxFS) with EMC software technology into solutions specifically designed and optimized for EMC’s industry-leading Symmetrix Enterprise Storage systems.

These host-based software solutions enable users to easily manage their Symmetrix-based data by providing a bridge between EMC Enterprise Storage systems and software, such as EMC TimeFinder, and VxVM and VxFS. By linking this VERITAS Software technology with Symmetrix, EMC allows customers to more easily leverage the robust enterprise storage capabilities of Symmetrix. In addition to providing each and every the universal benefits of the VERITAS Foundation Suite, the EMC Foundation Suite by VERITAS allows users to manage advanced EMC software and understand the underlying configuration of their Symmetrix systems, further simplifying the management of enterprise storage. For more information visit http://www.EMC.com orhttp://www.veritas.com/

DATA universal ENHANCES AViiON NT SERVER LINE

Westboro, MA — Data universal Corporation expanded its AViiON Windows NT server line with the introduction of the AV 2300, its newest entry-level server. The AV 2300 will live available with Intel’s powerful new Pentium III 550 MHz processors. The company furthermore announced that the AV 2700R, portion of its departmental server line, will live upgraded to 550 MHz Intel Pentium III processors.

The new, entry-level AV 2300 will live available in a tower package with single or dual 500 or 550 MHz Pentium III processors, each with 512 KB cache and can support up to 2 GB of memory. The AV 2300 has seven I/O slots: six PCI and one ISA slots. Storage includes five hot-swap disk bays, plus support for up to two CLARiiON SCSI and Fibre disk arrays. The AViiON AV 2700R server can live rackmounted in “high-density” configurations using up to 12 dual-processor systems in a single cabinet. These servers are the platform for Data General’s NT Cluster-in-a-Box and TermServer-in-a-Box packages. For more information visit http://www.dg.com

HDS INTROS P9 PILOT series OF CMOS-BASED SERVERS

Santa Clara, CA — Hitachi Data Systems has announced the P9 Pilot Series, a new generation of CMOS-based enterprise servers designed to enable customers to manipulate more than two billion Internet hits a day.

The new Pilot P9 performs at nearly 1,700 MIPS (Million Instructions Per Second) when configured with 13 instruction processors (IPs), making it the world’s most powerful commercial enterprise server currently available. Additionally, the P8 Pilot series can live fully upgraded to the P9 Series, with each and every new features available on the P9 to live extended to P8 as well.

MAXTOR ANNCS 27.2GB DESKTOP DRIVES

Milpitas, CA — Maxtor Corporation announced the DiamondMax 6800 arduous disk drive, the newest addition to its DiamondMax product line. With 6.8 GB of capacity per disk, the powerful new drive provides up to 27.2 gigabytes of tall performance storage, the highest capacity in its class for today’s video, audio, and Internet computing needs.

The DiamondMax 6800 features a new dual-microprocessor controller for enhanced performance. The Maxtor DualWave processor uses the power of two high-speed processors, which improves drive and system performance through a 90% reduction in drive command overhead. furthermore featured is a second-generation enhancement to ShockBlock, Maxtor’s drive mechanics. Designed to protect the drive from damage caused by improper handling, the new ShockBlock design has demonstrated the ability to withstand up to 1,000G short-duration shock loads without drive failure. For more information visit http://www.maxtor.com/

DELL PRECISION WORKSTATIONS proffer 550MHZ PENTIUM IIIs

Round Rock, TX — Dell Computer Corporation, a direct computer systems company, today announced availability of Dell Precision WorkStations with Intel 550MHz Pentium III processors and two new graphics card options.

Both the mid-range Dell Precision WorkStation 410 and entry-level Dell Precision WorkStation 210 are available with 550MHz Pentium III processors in single- and dual-processor configurations. Prices for a Dell Precision WorkStation with the new 550MHz Pentium III processor start at $2,041(1).

PARASOFT DELIVERS FREE VERSION OF INSURE++ TO LINUX DEVELOPERS

Monrovia, CA — ParaSoft, a provider of software oversight prevention and detection solutions, announced a new, lite version of Insure++, the most thorough automatic runtime oversight detection tool. The lite version is available free of freight and exclusively on the Official Red Hat Linux 6.0 Application CD, distributed by Red Hat Software Inc., the market-leading Linux developer and support provider.

With Linux gaining momentum as a progress platform, ParaSoft created a special lite version of Insure++ for distribution with Red Hat’s Application CD. Current and future C/C++ developers on Linux can now profit from Insure++’s capabilities, ultimately shortening the progress cycle, lowering progress costs and delivering higher trait software applications through oversight detection. For more information visit http://www.parasoft.com

PROGRESS SW DELIVERS UP TO 5K commerce APPS TO LINUX PLATFORM

Bedford, MA — Progress Software Corporation, a supplier of application development, deployment and management products, announced that it will deliver new products to its Independent Software Vendors (ISVs) and end-user customers to hearten them port more than 5,000 commerce applications to the Linux operating system.

“In keeping with their commitment to providing open solutions and helping their customers ‘Future Proof’ their applications for the Internet age, Progress Software will hearten fuel the movement of packaged applications to Linux via the more than 2,000 ISVs that sell Progress-based applications,” said Dave Ireland, vice president and universal manager, Progress Software. “Our goal is to empower their partners and customers by offering them an emerging open platform on which to sell or race their commerce applications.” For more information visit http://www.progress.com

ZENGUIN TO DEVELOP LINUX APP INSTALLER

Oakland, CA — Zenguin, Inc., a new Linux software publisher announced that it has launched progress of a user-friendly application installer for Linux.

The Zenguin Installer for Applications will solve a key problem faced by Linux application developers today: how to accommodate significant differences among various versions of the Linux operating system, such as those developed by Caldera, Red Hat, SuSE, Debian, Slackware, and Pacific HiTech. Currently, there are more than 12 distributions of the Linux OS in widespread spend today. For additional information visit http://www.zenguin.com

IBM TO UNVEIL NEW DATABASE SOFTWARE

Armonk, NY — As Reuters reported, IBM plans to publish a new version of its database software which it claims makes it easier and faster for customers to develop electronic commerce applications.

International commerce Machines Corp. said the latest version will race on operating systems such as IBM’s version of Unix, IBM’s OS/2, Sun Microsystems Inc.’s Solaris, Hewlett-Packard Co.’s HP-UX as well as Microsoft Corp.’s Windows NT and Windows 98.

JAPANESE COMPANY TO OPEN VIRTUAL SHOWROOM FOR CAD/CAM SW

Tokyo, Japan — As Nikkei English tidings reported, NCnetwork will open a virtual showroom on the Internet for CAD/CAM (computer-aided design/computer-aided manufacturing) software from 17 developers, including Nihon Unisys Ltd. and Autodesk Ltd. Japan.

Accessible through the NCnetwork Web site at www.nc-net.or.jp., the showroom will proffer search functions to hearten visitors find products best suited to their usage requirements and budget. It will furthermore enable customers to contact software manufacturers directly to request documentation or set orders.

APPLIED MICROSYSTEMS INTROS NEW CODETEST TOOLS

Redmond, WA — Applied Microsystems Corporation (AMC) has scored yet another industry first by offering the only suite of test and analysis tools that can live used through the entire embedded software progress cycle. AMC announced the addition of CodeTEST-Native and CodeTEST-SW-In-Ckt, two new versions of its common CodeTEST software test and analysis tools based on instrumentation technology.

By expanding the CodeTEST family of software visibility products with two new software-only versions, AMC gives embedded software progress teams much needed gains in productivity with embedded software test and analysis methods that migrate through each stage of software development. With common file formats for native, software and hardware test and analysis, CodeTEST becomes the basis for a coherent, integrated test methodology. Developers can reuse the identical GUI, data file formats and automation scripts throughout the embedded software progress process, ultimately saving effort, time, and money. For more information visit http://www.amc.com/

NEC FORECASTS QUICK DVPT OF 64-BIT PC SERVERS

Tokyo, Japan — As Nikkei English tidings reported, NEC Corp. hopes to complete by year-end its progress of a prototype 64-bit PC server that incorporates next-generation 64-bit microprocessors from Intel Corp. and the upcoming Windows 2000 operating system from Microsoft Corp. Intel plans to open shipping samples of the new microprocessors by the middle of this year, commencing full-scale production by mid-2000. Looking to match Intel’s pace and gain an early lead in the market, NEC is accelerating its progress of the new 64-bit parallel-processing servers.

NEC currently has the top share of the Japanese market for 32-bit servers. The company hopes to maintain its lead in the high-performance market with the early progress of a 64-bit machine. The 64-bit server, designed for high-volume applications such as electronic commerce and data processing centers, will live configured with 16 64-bit processors.

MERIDIAN DATA LAUNCHES CD-ROM NTWK SERVER

Scotts Valley, CA — Meridian Data Inc., a provider of network-attached storage (NAS) solutions, announced its CD Net Universal XP Cache, a high-performance, low-cost CD-ROM network server that allows up to 30 typical CD titles to live cached on a single arduous disk. Meridian Data’s new workgroup CD-ROM network-attached storage (NAS) server provides users maximum data throughput for data-intensive CD-ROMs such as multimedia applications across most PC networks, the Internet and corporate intranets, with prices starting at $2,625.

CD Net Universal XP Cache features a 100 megahertz, 32-bit RISC processor and high-speed, dependable SCSI-II CD-ROM drives, allowing swiftly access and quick response times to multiple simultaneous users. With the standard 9GB SCSI arduous drive for archiving CDs, XP Cache provides shared access to multiple CD titles at arduous disk speed without having discs resident on the server. The server furthermore comes standard with a 32-megabyte data cache, which can live expanded to 160 megabytes using standard DIMM modules and includes an auto-sensing 10/100 Mbps Ethernet connection. For more information visit http://www.meridian-data.com

MICROSOFT INTROS DEVELOPER TOOLS INTEROP KIT

Redmond, WA — Microsoft Corp. announced the immediate, royalty-free availability of the Developer Tools Interoperability Kit. This new kit provides progress tools vendors with specifications and test software to enable Microsoft’s Java language interoperability technologies to live incorporated into third-party compilers and virtual machines.

These interoperability technologies, which involve the Microsoft J/Direct application programming interface, Java/COM and Delegates, enable vendors to proffer tools that can tightly integrate applications written in the Java language with other programming languages, operating systems and hardware. In turn, software developers using the compilers and virtual machines that support these technologies Have the option to build applications that proffer superior performance, richer functionality, and better interoperability with software written in other languages and select maximum odds of customer investments in Microsoft Windows operating system-based hardware and software. For more information visit http://www.microsoft.com/java/

NOVELL INTROS NDS FOR LINUX

Provo, UT — Novell, Inc. announced Novell Directory Services (NDS) for Linux, the next milestone in its strategy to extend its next-generation, scalable Internet directory service, NDS 8, across the major computing platforms of the enterprise and the World Wide Web. Running natively on Linux, NDS will enable customers to effectively manage Linux workstations and servers and integrate these Linux resources with NetWare, NT and Solaris systems on enterprise networks. Novell expects to accomplish NDS for Linux available by the stay of calendar year 1999.

By running across platforms, NDS enables customers to choose the hardware, server operating systems, and client operating systems that best meet their requirements. Customers can deploy a single directory infrastructure for managing and securing their platforms and applications of choice, establishing a single-user sign-on and single point of administration that dramatically reduces the cost and complexity of network administration and management. In addition, scalable NDS 8 supports an expanding spectrum of directory-enabled applications that leverage user identity information as the basis for customized Internet and e-commerce services. For more information visit http://www.novell.com/

POWER CTR SW SHIPS SYSTEM MGMT SUITE FOR LINUX

Raleigh, NC — Power headquarters Software LLC, a supplier of enterprise systems management software, announced that its Power headquarters System Management Suite now supports the LINUX OS and features interconnectivity with Compaq OpenVMS, UNIX and Windows NT. The Power headquarters Software Suite is the first multi-vendor system management software shipping for the LINUX OS.

Power headquarters reportedly guarantees system availability and improves management efficiency by rapidly detecting and correcting problems with computer systems, networks, peripherals and applications. With Power Center, it’s simple to manage any computer environment ranging from a single workgroup system to a worldwide network of thousands of systems from many different hardware manufacturers.

UNISYS ANNOUNCES ENTERPRISE SERVER PRODUCTS

Madrid, Spain — Unisys Corporation announced a broad spectrum of enterprise server products and technology alliances that support the expected growth of the company’s technology business. Bolstered by growing demand for its common ClearPath and Aquanta ES enterprise server offerings, Unisys has accelerated progress of a third engine for technology growth — component technology alliances — exemplified by the announcement of a contract anticipated to live worth $300 million over several years.

Unisys furthermore announced a new ClearPath enterprise server that provides customers with a higher level of performance and a dramatically lower price/performance ratio. Unisys furthermore revealed that customer tests of its new Aquanta ES5085 server Have demonstrated that the performance of the new 8-way Intel Pentium III Xeon system running Windows NT more than doubles that of a 4-way Aquanta server running the identical application. For more information visit http://www.unisys.com

MTI INTROS GLADIATOR 2550 RAID STORAGE SYSTEM

Anaheim, CA — MTI Technology Corp. has introduced the Gladiator 2550 enterprise RAID data storage system, the first in a planned series of cross-platform, high-availability storage solutions designed for the fast-growing Linux and Windows NT operating environments. The storage system offers users a secure, high-performance storage environment for Internet, intranet, e-mail, print, database and file servers running commerce applications such as online transaction processing (OLTP), determination support, data warehousing, data mining, workgroup computing, e-commerce and Web-based applications.

Linux servers are rapidly being embraced by Internet-related businesses, the fastest growing market segment for MTI’s storage solutions. As a result, in February 1999, MTI and Caldera Systems Inc. began joint progress of Linux-compatible enterprise storage solutions for the emerging Internet- related commerce market and other applications. The Gladiator 2550 is the first product to result from this collaboration. Caldera is a technology leader in designing, developing and marketing Linux for commerce solutions. The Gladiator 2550 provides a scalable solution that supports Caldera’s OpenLinux 2.2 operating system, offering small- to medium-size businesses a storage strategy consisting of cost-effective and easy-to-use storage products for Linux-based commerce applications. For more information visit http://www.mti.com

SEQUENT TO DELIVER PRICE/PERFORMANCE INCREASES ACROSS NUMA-Q LINES

Beaverton, OR — Sequent Computer Systems, the leader in Intel based data headquarters solutions, announced it would deliver significant price/performance increases across its NUMA-Q 1000 and NUMA-Q 2000 server lines, with the introduction of more powerful Intel Pentium III Xeon-based systems available immediately.

The price performance gains span across Sequent’s product line including NUMA-Q 1000 four and eight processor servers and high-end NUMA-Q 2000 bundles with sixteen, twenty and twenty-four processors. Sequent furthermore announced plans to ship Intel Pentium III Xeon 550MHz processor-based systems later this year. For more information visit http://www.sequent.com

LINUXCARE ANNCS LINUXCARE LABS

San Francisco, CA — Linuxcare, Inc., a provider of technical support, consulting, education, and product certification for Linux, announced today the launch of Linuxcare Labs, a comprehensive program for independently certifying hardware and software for spend with the Linux operating system.

According to David Sifry, Linuxcare CTO, Linuxcare Labs adheres to a testing methodology that contributes to the open standards exertion in the Linux community. With a vendor-neutral approach, Linuxcare Labs will hearten obviate fragmentation of the Linux platform while fostering the continued progress of the operating system, Sifry said. For more information visit http://www.linuxcare.com

WOLFRAM RESEARCH ANNOUNCES MATHEMATICA 4

Champaign, IL — Mathematica 4, the latest release of Wolfram Research, Inc.’s technical computing system, combines extraordinary calculating abilities with a comprehensive collection of visualization and technical publishing tools — each and every in a single, elegant environment. Mathematica 4 unveils new capabilities including additional mathematical functions, spell checking with an extensive scientific vocabulary, and enhanced tools for both traditional and web publishing. The combination of swiftly new internal algorithms, increased capabilities for importing and exporting, and new document-processing features accomplish Mathematica 4 model for final simulations as well as prototyping — a complete ideas-to-results computing environment.

Mathematica 4 is the first release under Wolfram Research’s multi-year “gigaNumerics” R&D program to create an optimized infrastructure enabling very large calculations without penalizing smaller ones. An ordinary PC or Macintosh can now manipulate operations on large numerical matrices — with a million or more elements — and accomplish calculations with million-digit accuracy. For more information visit http://www.wolfram.com/products/mathematica/newin4

— This file compiled by Steve Fisher, HPCwire managing editor. Email: [email protected]


HP TouchPad Needs 6 to 8 Weeks for Additional Shipments | killexams.com actual questions and Pass4sure dumps

First Name: Last Name: E-mail Address: Password: Confirm Password: Username:

Title: C-Level/President Manager VP Staff (Associate/Analyst/etc.) Director

Function:

Role in IT decision-making process: Align commerce & IT Goals Create IT Strategy Determine IT Needs Manage Vendor Relationships Evaluate/Specify Brands or Vendors Other Role license Purchases Not Involved

Work Phone: Company: Company Size: Industry: Street Address City: Zip/postal code State/Province: Country:

Occasionally, they send subscribers special offers from select partners. Would you affection to receive these special confederate offers via e-mail? Yes No

Your registration with Eweek will involve the following free email newsletter(s): tidings & Views

By submitting your wireless number, you correspond that eWEEK, its related properties, and vendor partners providing content you view may contact you using contact headquarters technology. Your consent is not required to view content or spend site features.

By clicking on the "Register" button below, I correspond that I Have carefully read the Terms of Service and the Privacy Policy and I correspond to live legally bound by each and every such terms.

Register

Continue without consent      

Ivanhoe Mines announces an independent pre-feasibility study (PFS) for the Tier One Kakula copper mine in the Democratic Republic of Congo | killexams.com actual questions and Pass4sure dumps

The stage one, six million-tonne-per-annum (6 Mtpa) operation at Kakula, with estimated progress capital of US$1.1 billion, yields an after-tax NPV8% of US$5.4 billion and an IRR of 47% over a 25-year mine life

The Kakula Mine's first stage will detached 6.8% copper over the first 5 years, with mine-site cash costs of US$0.43/lb copper

Ivanhoe furthermore announces an updated independent preparatory economic assessment (PEA) for an expanded Kakula-Kamoa production rate of 18 Mtpa, supplied initially by a 6 Mtpa mine at Kakula, followed by two 6 Mtpa mines at Kansoko and Kakula West, and a world-scale direct-to-blister smelter

The PEA envisions the staged mine expansions and smelter will live funded from internal cash flows and yields an after-tax NPV8% of US$10.0 billion and an IRR of 41%

Once the expanded PEA production rate of 18 Mtpa is achieved, Kamoa-Kakula is projected to become the world's second largest copper mine, with peak annual production of more than 700,000 tonnes of copper

Cape Town, South Africa--(Newsfile Corp. - February 6, 2019) - Robert Friedland, Co-Chairman of Ivanhoe Mines (TSX: IVN) (OTCQX: IVPAF), announced today in a keynote address at the 25th annual Mining Indaba that the company and its Chinese partners, Zijin Mining Group and Crystal River Global Limited, welcome the extremely positive findings of an independent pre-feasibility study (PFS) for the progress of the Kakula copper mine and an updated, expanded preparatory economic assessment (PEA) for the overall progress contrivance of the Kamoa and Kakula copper discoveries at the Kamoa-Kakula Project on the Central African Copperbelt, in the Democratic Republic of Congo (DRC).

"It has been a remarkable 25 years since my first keynote presentation at the very first Mining Indaba, in this gorgeous city of Cape Town, South Africa. In that inaugural speech in 1994, they shared with delegates how African Minerals, the founding, corporate trailblazer for Ivanhoe Mines, was focused on its quest for major discoveries in and around Southern Africa's legendary mineral fields," said Mr. Friedland.

"Now, after more than a quarter of a century of exceptional sphere work by their team of visionary and tenacious exploration geologists, they are about to accomplish the 'Great Leap Forward' from one of the modern world's top mine finders to one of the world's leading producers of copper - as well as palladium, platinum, zinc, nickel, gold, silver and rhodium from the other two major mining projects that Ivanhoe is developing in Southern Africa.

"To each and every of their African Brothers and Sisters, you now can clearly espy the fruits of the incredibly intensive efforts by their people over the past two decades, while overcoming countless challenges, to initially discover, then extensively expand, the Kamoa and Kakula resource base with a massive drilling and engineering effort.

"The Kamoa-Kakula Project now stands as the 'Beacon that Shines Light' on the fundamental import of stable and transparent legal and fiscal frameworks. Looking back on the final 25 years, they reiterate the obvious fact that mining is a very long-term commerce that requires stability to attract capital. Future generations of young Congolese people will massively profit from the establishment of a stable and predictable fiscal environment to attract foreign investment.

"Today, together with their strategic shareholder CITIC Metal, their Co-Chairman Yufeng "Miles" Sun, their Chinese joint-venture confederate Zijin Mining, and the newly elected DRC government, led by His Excellency Félix Antoine Tshisekedi Tshilombo, they are supercilious to share with the world these outstanding, independently-prepared, engineering studies conducted over the past two years.

"These studies clearly prove their long-standing conviction that Kamoa-Kakula is firmly on track to become one of the absolute greatest copper mining complexes in the world, helping to restore Katanga's rightful position as the world's largest copper producing region. This would not Have happened without the extraordinary efforts of the Ivanhoe discovery team and their investment of more than US$800 million in exploration and development.

"We now view forward to working with the new government of the DRC and the Congolese people to develop Kamoa-Kakula to its plenary potential, generating widely shared economic benefits that will hearten to uplift local communities, and provide skills training to hearten ensure that young Congolese can qualify for the thousands of meaningful direct and circuitous jobs that will live created."

Today's PFS and updated PEA build on the outstanding results of the previous PEA announced in November 2017. The PFS has advanced the minute design and engineering in that earlier study and has confirmed the viability of the project. As well, the re-scoped and expanded PEA shows the potential to develop the project to a larger scale and with a larger production capacity.

The Kamoa-Kakula Project has been independently ranked as the world's largest high-grade copper discovery by international mining consultant Wood Mackenzie of London in the United Kingdom.

The PFS and PEA encompass two progress scenarios:

  • Pre-feasibility study for stage one Kakula mine development. The Kakula 2019 PFS evaluates the progress of a stage one, 6 Mtpa underground mine and surface processing complicated at the Kakula Deposit - a 2016 discovery that occurred just three years ago.

  • Expanded, subsequent progress to three producing mines. The Kamoa-Kakula 2019 PEA furthermore includes an option for an integrated, 18 Mtpa, three-stage development, genesis with initial production from the Kakula Mine, to live followed by a subsequent, separate underground mining operation at the nearby Kansoko and Kakula West mines, along with the construction of a direct-to-blister smelter. A further four separate mines will live developed in the Kamoa North area as resources are mined out, to maintain the production rate at 18 Mtpa.

  • The Kakula 2019 PFS and Kamoa-Kakula 2019 PEA were independently prepared by Amec Foster Wheeler E&C Services Inc. (a division of Wood PLC) of Reno, USA; DRA Global of Johannesburg, South Africa; KGHM Cuprum R&D Centre Ltd. of Wroclaw, Poland; OreWin Pty Ltd. of Adelaide, Australia; Stantec Consulting International LLC of Arizona, USA, and SRK Consulting Inc. of Johannesburg, South Africa.

    The Kamoa-Kakula 2019 PEA is preparatory in nature and includes an economic analysis that is based, in part, on Inferred Mineral Resources. Inferred Mineral Resources are considered too speculative geologically for the application of economic considerations that would allow them to live categorized as Mineral Reserves - and there is no conviction that the results will live realized. Mineral Resources finish not Have demonstrated economic viability and are not Mineral Reserves.

    A National Instrument 43-101 technical report will live filed on SEDAR at www.sedar.com and on the Ivanhoe Mines website at www.ivanhoemines.com within 45 days of the issuance of this tidings release. The technical report furthermore will involve an updated Kamoa pre-feasibility study, which evaluates the progress of the Kansoko Mine as a stand-alone 6 Mtpa underground mine and surface processing complicated that would live supplied with ore from the planned progress of the Kansoko Sud and Kansoko Centrale areas of the Kamoa Deposit. The Kamoa 2019 PFS will restate the findings of the Kamoa 2017 PFS with economics based on updated assumptions.

    Cannot view this image? Visit: https://media.zenfs.com/en-us/newsfile_64/378e5e9542885466f6c98765065b5c24

    More

    Map of the Kamoa-Kakula mining licence showing the Kakula and Kansoko mining areas, as well as Kakula West, Kamoa North, and a portion of Ivanhoe's adjacent, 100%-owned Western Foreland exploration-licences area.

    To view an enhanced version of this map, please visit:https://orders.newsfilecorp.com/files/3396/42671_1589eb07840f79c5_002full.jpg

    "The new PFS and PEA, independently prepared by six of the world's top engineering firms, reinforces the fact that Kamoa-Kakula is unquestionably the world's best undeveloped copper discovery," said Mr. Friedland. "Kamoa-Kakula is unique as it combines ultra-high copper grades in thick, shallow and flat-lying orebodies ─ allowing for large-scale, highly-productive, mechanized underground mining operations. Kakula is projected to Have an detached grade of 6.8% copper over the initial five years of operations, and 6.4% copper over the first 10 years ─ grades that are orders of magnitude higher than the majority of the world's other major copper mines.

    "This mine is getting built. And, most importantly, it is being built to international best practices that will live a showcase for accountable mine development.

    "As obliging as the economic numbers are in this PFS for Kakula, you simply cannot apply conventional discounted cash flood analysis to Tier One projects affection Kamoa-Kakula and hope to snare a sensible retort on long-term value. Massive, high-grade deposits affection they Have organize at Kamoa-Kakula ─ which Have the potential to bear large quantities of copper for multiple generations ─ are very long-term plays. The actual value is generated over time, in the phased expansions.

    "Ten years ago at the World Copper Conference in Santiago, Chile, they announced to the world that Ivanhoe Mines had "made a major copper discovery of historic importance" in a previously unrecognized area that was beyond the western stay of the Copperbelt in the Congo, and that "Kamoa will become a world-class mining camp of considerable import to the Democratic Republic of Congo."

    "Today, together with their partners, Zijin Mining and the government of the DRC, and the outstanding work by their exceptionally talented team at Kamoa-Kakula, comprised mainly of bright, young Congolese men and women, they are making these bold predictions arrive true.

    "We invite institutional investors and analysts to visit the DRC, meet the people, and espy first-hand how their team is transforming the original Kamoa discovery they announced 10 years ago into a state-of-the-art mining operation with the potential to become one of the world's three largest copper mines, with peak annual production of more than 700,000 tonnes of copper.

    Cannot view this image? Visit: https://media.zenfs.com/en-us/newsfile_64/e13e3b1fe8314d735a83ae9930a1d858

    More

    Photo. Robert Friedland greeting Kamoa-Kakula employees during a site visit.

    To view an enhanced version of this photo, please visit:https://orders.newsfilecorp.com/files/3396/42671_1589eb07840f79c5_003full.jpg

    Mr. Johansson, Chief Executive Officer and President of Ivanhoe Mines, said that discussions for financing the construction of the initial 6 Mtpa mine at Kakula are progressing well with China-based monetary institutions. CITIC Metal, Ivanhoe's largest shareholder, is assisting with the discussions.

    Mr. Johansson furthermore preeminent that today's economic assessments finish not factor in the recent exploration success at Kamoa North, which is a prospective new mining area. The current study furthermore does not factor in the ongoing drilling programs on new targets at Kamoa-Kakula or the company's 100%-owned Western Foreland exploration area. Additional exploration successes that already Have occurred may well Have a significant positive influence on the size, value, and timing of the overall progress plan; as such, the Kamoa-Kakula progress plans will live continuously reassessed and amended as the project moves forward to reflect ongoing exploration success.

    "The 18 million-tonne-per-annum progress scenario clearly shows the economic potential for a phased progress contrivance for Kamoa-Kakula to become one of the largest copper mines in existence," said Mr. Johansson. "However, as evidenced by their remarkable discovery cavity drilled at Kamoa North announced final week ─ the thickest high-grade intersection yet at Kamoa-Kakula returning 13.05% copper over 22.3 metres starting at a depth of only 190 metres below surface ─ they are confident that there are more high-grade copper discoveries to live made in the area and the ultimate scale of operations at Kamoa-Kakula can live much larger. They espy no geological limitation to the goal of eventually producing one million tonnes of copper per year.

    "While their engineers are focused on expediting the progress of the initial Kakula Mine, their geological team remains focused on unlocking the plenary potential of the Kamoa-Kakula and Western Foreland copper districts. They contrivance to withhold the drills turning as they continue their search for the next Kakula, or perhaps an even better discovery.

    Mr. Johansson furthermore said that the implementation of community-support initiatives at Kamoa-Kakula are central to mine-planning considerations. "Ivanhoe and Zijin are supercilious of their community-support initiatives that involve fish and chicken farming, agricultural projects, and the construction of new schools, houses, clinics, roads and power infrastructure.

    "We already Have made significant improvements in the lives of the Congolese people live in the communities near Kamoa-Kakula that will hearten promote and define their children's health and education for the foreseeable future."

    Cannot view this image? Visit: https://media.zenfs.com/en-us/newsfile_64/bb42b2685a99999be8661f8f1869f4ff

    More

    Photo. Secondary students in one of the new schools built in a village near the Kamoa-Kakula Project, as portion of the project's community relations program.

    To view an enhanced version of this photo, please visit:https://orders.newsfilecorp.com/files/3396/42671_1589eb07840f79c5_004full.jpg

    HIGHLIGHTS

    Initial 6 Mtpa mine at Kakula

  • The Kakula 2019 PFS analyzes the progress of an initial 6 Mtpa Kakula Mine at the Kakula Deposit in the southerly portion of the Kamoa-Kakula Project's discovery area. For this option, the PFS envisages an detached annual production rate of 291,000 tonnes of copper at a mine-site cash cost of US$0.46 per pound (lb) copper and total cash cost of US$1.11/lb copper for the first 10 years of operations, and copper annual production of up to 360,000 tonnes by year four.

  • An initial capital cost of US$1.1 billion for this option would result in an after-tax net present value at an 8% discount rate (NPV8%) of US$5.4 billion. The internal rate of recur of 46.9% and project payback era of 2.6 years confirm the compelling economics for the Kamoa-Kakula Project's stage one of production.

  • Kakula benefits from an ultra-high, detached feed grade of 6.8% copper over the first five years of operations, and 5.5% copper on detached over a 25-year mine life.

  • Basic engineering is underway, expected to live completed around mid-year, running in parallel with a definitive feasibility study expected to live completed around year-end.

  • Development of twin underground declines has been completed at Kakula, with ongoing underground progress activities, including access drives and ventilation raises. In addition, a box slit for a ventilation decline on the southern side of the Kakula orebody is nearing completion.

  • Modular, integrated, expanded progress option of Kakula and Kamoa deposits, mining a total of 18 Mtpa, with construction of a direct-to-blister smelter

  • The Kamoa-Kakula 2019 PEA presents the alternative progress option of a three-phase, sequential operation on Kamoa-Kakula's high-grade copper deposits.

  • Initial production would occur at a rate of 6 Mtpa from the Kakula Mine, before increasing to 12 Mtpa with mill feed from the Kansoko Mine. A third 6 Mtpa mine then will live developed at Kakula West, bringing total production rate to 18 Mtpa. As resources at Kakula and Kansoko are mined, the PEA envisages that production would open at several mines in the Kamoa North area to maintain 18 Mtpa throughput over a 37-year mine life.

  • For the three-phase sequential operation, the PEA envisages US$1.1 billion in initial capital costs. Future expansion at the Kansoko Mine, Kakula West Mine and subsequent extensions could live funded by cash flows from the Kakula Mine, resulting in an after-tax net present value at an 8% discount rate (NPV8%) of US$10.0 billion and an internal rate of recur of 41%.

  • Under this approach, the PEA furthermore includes the construction of a direct-to-blister sparkle copper smelter at the Kakula plant site with a capacity of one million tonnes of copper concentrate per annum to live funded from internal cash flows. This would live completed in year five of operations, achieving significant savings in treatment charges and transportation costs.

  • The 18 Mtpa scenario delivers detached annual production of 382,000 tonnes of copper at a total cash cost of US$0.93/lb copper during the first 10 years of operations and production of 740,000 tonnes by year 12. At this future production rate, Kamoa-Kakula would rank as the world's second largest copper mine.

  • Figure 1 describes the expanded progress scenario for the Kamoa-Kakula 2019 PEA and figure 2 shows an overview of deposits included within the Kakula 2019 PFS (6 Mtpa case), Kamoa 2019 PFS (6 Mtpa) and Kamoa-Kakula 2019 PEA (18 Mtpa). Additional exploration success at Kakula West, Kamoa North or regional exploration targets may well Have a significant, positive influence on the size, value and timing of the overall progress plan.

    Cannot view this image? Visit: https://media.zenfs.com/en-us/newsfile_64/187569651888275f3f60fc4ad2947097

    More

    Figure 1. Kamoa-Kakula 18 Mtpa PEA long-term progress plan.

    To view an enhanced version of figure 1, please visit:https://orders.newsfilecorp.com/files/3396/42671_1589eb07840f79c5_005full.jpg

    Figure by OreWin 2019.

    Cannot view this image? Visit: https://media.zenfs.com/en-us/newsfile_64/d9b6750c36b3ee6b9ed09d536455941c

    More

    Figure 2. Overview of deposits included within the Kakula 2019 PFS (6 Mtpa ─ outlined in red box), Kamoa 2019 PFS (6 Mtpa ─ outlined in blue box) and Kamoa-Kakula 2019 PEA (outlined in green box).

    To view an enhanced version of figure 2, please visit:https://orders.newsfilecorp.com/files/3396/42671_1589eb07840f79c5_006full.jpg

    Figure by OreWin 2019.

    Summary of the PFS's key results for an initial Kakula Mine

  • Very-high-grade, stage-one production is projected to Have a grade of 7.1% copper in the second year of production and an detached grade of 6.4% copper over the initial 10 years of operations, resulting in estimated detached annual copper production of 291,000 tonnes.

  • Annual copper production is estimated at 360,000 tonnes in year four.

  • Initial capital cost, including contingency, is estimated at US$1.1 billion.

  • Average total cash cost of US$1.11/lb copper during the first 10 years, inclusive of royalties.

  • After-tax NPV, at an 8% discount rate, of US$5.4 billion.

  • After-tax internal rate of recur (IRR) of 46.9%, and a payback era of 2.6 years.

  • Kakula is expected to bear a very-high-grade copper concentrate in excess of 55% copper, with extremely low arsenic levels.

  • Key initial projections from the Kakula 2019 PFS

    The study assesses the potential progress of the Kakula Deposit as a 6 Mtpa mining and processing complex. The Kakula mill would live constructed in two smaller phases of 3 Mtpa each as the mining operations ramp-up to plenary production of 6 Mtpa. The life-of-mine production scenario provides for 119.7 million tonnes to live mined at an detached grade of 5.48% copper, producing 9.8 million tonnes of high-grade copper concentrate, containing approximately 12.4 billion pounds of copper.

    The economic analysis uses a consensus, long-term copper price of US$3.10/lb and returns an after-tax NPV at an 8% discount rate of US$5.4 billion. It has an after-tax IRR of 46.9% and a payback era of 2.6 years.

    The estimated initial capital cost, including contingency, is US$1.1 billion. The capital expenditure for off-site power, which is included in the initial capital cost, includes advances to the DRC state-owned electricity company, Société Nationale d'Electricité (SNEL), to upgrade two hydropower plants (Koni and Mwadingusha) to provide the Kamoa-Kakula Project with access to spotless electricity for its planned operations.

    Cannot view this image? Visit: https://media.zenfs.com/en-us/newsfile_64/6197c03b64f7f20b7d1c49e84c3c099e

    More

    Photo. Kakula's initial two declines intersected the mineralized reef on the northern edge of the Kakula Deposit in late January and underground mine progress now is progressing toward the initial, high-grade mining area.

    To view an enhanced version of this photo, please visit:https://orders.newsfilecorp.com/files/3396/42671_1589eb07840f79c5_007full.jpg

    Key results of the Kakula 2019 PFS for a single 6 Mtpa mine are summarized in Table 1.

    Table 1. Kakula Mine results summary for 6 Mtpa production.

    Item Unit Total Total Processed      Quantity Milled kt 119,728      Copper Feed Grade % 5.48 Total Concentrate Produced      Copper Concentrate Produced kt (dry) 9,776      Copper Recovery % 85.35      Copper Concentrate Grade % 57.32      Contained Copper in Concentrate Mlb 12,354      Contained Copper in Concentrate kt 5,604      Peak Annual Recovered Copper Production kt 360 10-Year Average      Copper Concentrate Produced kt (dry) 508      Contained Copper in Concentrate kt 291      Mine-Site Cash Cost US$/lb payable 0.46      Total Cash Cost US$/lb payable 1.11 5-Year Average      Copper Concentrate Produced kt (dry) 465      Contained Copper in Concentrate kt 267      Mine-Site Cash Cost US$/lb payable 0.43      Total Cash Cost US$/lb payable 1.08 Key monetary Results      Peak Funding US$M 1,099      Initial Capital Costs US$M 1,078      Expansion Capital Costs US$M 778      LOM detached Mine Site Cash Costs US$/lb payable 0.59      LOM detached Total Cash Costs US$/lb payable 1.24      Site Operating Costs US$/t Milled 59.4      After-Tax NPV8% US$M 5,440      After-Tax IRR % 46.9      Project Payback Period Years 2.6      Project Life Years 25

     

    Table 2 summarizes the monetary results and Table 3 summarizes potential mine production and processing statistics.

    Table 2. Kakula Mine monetary results for 6 Mtpa production.

    Net Present Value (US$M) Discount Rate Before Taxation After Taxation Undiscounted 19,317 13,575 4.0% 12,053 8,411 6.0% 9,693 6,733 8.0% 7,875 5,440 10.0% 6,457 4,432 12.0% 5,336 3,635 Internal Rate of Return - 55.6% 46.9% Project Payback era (Years) - 2.4 2.6

     

    Table 3. Kakula Mine detached estimated production and processing statistics for 6 Mtpa production.

    Item Unit YEARS1-5 YEARS1-10

    LOM

    AVERAGE

    Total Processed Quantity Milled kt 4,589 5,321 4,789 Copper Feed Grade % 6.79 6.39 5.48 Annual Concentrate Produced Copper Concentrate Produced kt (dry) 465 508 391 Copper Recovery % 85.6 85.6 85.3 Copper Concentrate Grade % 57.3 57.3 57.3 Contained Copper in Concentrate Copper Mlb 588 642 494 Copper kt 267 291 224 Payable Copper Copper Mlb 575 628 483 Copper kt 261 285 219

     

    The Kakula concentrator production is shown in figure 3 and the concentrate and copper production is shown in figure 4.

    Cannot view this image? Visit: https://media.zenfs.com/en-us/newsfile_64/fbfe00a4d7e9e74d774b7d8f57cba047

    More

    Figure 3. Kakula Mine estimated tonnes milled and head grade for the life-of-mine.

    To view an enhanced version of figure 3, please visit:https://orders.newsfilecorp.com/files/3396/42671_1589eb07840f79c5_008full.jpg

    Figure by OreWin 2019.

    Cannot view this image? Visit: https://media.zenfs.com/en-us/newsfile_64/dd87747e8c4f855fd8f48212239bed8e

    More

    Figure 4. Kakula Mine estimated concentrate and copper production for the life-of-mine.

    To view an enhanced version of figure 4, please visit:https://orders.newsfilecorp.com/files/3396/42671_1589eb07840f79c5_009full.jpg

    Figure by OreWin 2019.

    Table 4 summarizes unit operating costs. Table 5 provides a breakdown of revenue and operating costs. Capital costs for the project are minute in Table 6.

    Table 4. Kakula Mine unit operating costs for 6 Mtpa production.

    US$/lb Payable Copper YEARS 1-5 YEARS 1-10 LOMAVERAGE Mine Site 0.43 0.46 0.59 Transport 0.31 0.31 0.31 Treatment & Refining Charges 0.15 0.15 0.15 Royalties & Export Tax 0.20 0.20 0.20 Total Cash Costs 1.08 1.11 1.24

     

    Cannot view this image? Visit: https://media.zenfs.com/en-us/newsfile_64/fe0d4fcf5509142e46f7449988f99063

    More

    Figure 5. 2019 Mine-site cash cost curve (includes each and every operational costs at mine site).

    To view an enhanced version of figure 5, please visit:https://orders.newsfilecorp.com/files/3396/42671_1589eb07840f79c5_010full.jpg

    Note: Represents mine-site cash costs that reflect the direct cash costs of producing paid concentrate or cathode incorporating mining, processing and mine-site G&A costs. Kakula is based on the detached mine-site cash cost during the first 10 years as minute in the Kakula 2019 PFS.

    Source: Wood Mackenzie (based on public disclosure, the Kakula 2019 PFS has not been reviewed by Wood Mackenzie).

    Cannot view this image? Visit: https://media.zenfs.com/en-us/newsfile_64/6bb8392060bd993fd5ca981016057742

    More

    Figure 6. 2019 C1 pro-rata copper cash cost curve (includes mining, processing, transportation and offsite realization costs).

    To view an enhanced version of figure 6, please visit:https://orders.newsfilecorp.com/files/3396/42671_1589eb07840f79c5_011full.jpg

    Note: Represents C1 pro-rata cash costs that reflect the direct cash costs of producing paid copper incorporating mining, processing, mine-site G&A and offsite realization costs, having made usurp allowance for the costs associated with the co-product revenue streams. Kakula is based on the detached total cash cost during the first 10 years as minute in the Kakula 2019 PFS.

    Source: Wood Mackenzie (based on public disclosure, the Kakula 2019 PFS has not been reviewed by Wood Mackenzie).

    Table 5. Kakula Mine estimated revenue and operating costs for 6 Mtpa production.

    TOTAL

    LOM

    YEARS1-5 YEARS 1-10 LOMAVERAGE US$M US$/t Milled Revenue      Copper in Concentrate 37,429 388.3 365.6 312.6 Gross Sales Revenue 37,429 388.3 365.6 312.6 Less: Realization Costs      Transport 3,707 38.5 36.2 31.0      Treatment & Refining 1,770 18.4 17.3 14.8      Royalties & Export Tax 2,403 24.9 23.5 20.1 Total Realization Costs 7,880 81.8 77.0 65.8 Net Sales Revenue 29,549 306.6 288.6 246.8 Site Operating Costs      Underground Mining 4,585 34.4 35.2 38.3      Processing 1,574 13.1 12.5 13.1      universal & Administration 816 6.4 6.0 6.8      SNEL Discount -212 -2.4 -2.5 -1.7      Customs 347 2.7 2.7 2.9 Total 7,111 54.0 54.0 59.4 Net Operating Margin 22,438 252.5 234.7 187.4 Net Operating Margin 75.9% 82.4% 81.3% 75.9%

     

    Table 6. Kakula Mine estimated capital investment summary for 6 Mtpa production.

    Description InitialCapital ExpansionCapital SustainingCapital Total US$M US$M US$M US$M MINING      Underground Mining 287 339 633 1,259      Capitalized Pre-Production 107 - - 107 Subtotal 394 339 633 1,367 POWER      Power Supply Off Site 64 - - 64 Subtotal 64 - - 64 CONCENTRATOR & TAILINGS      Process Plant 190 125 219 534      Tailings - - 83 83 Subtotal 190 125 303 617 INFRASTRUCTURE      Surface and Plant Infrastructure 132 138 187 458 Subtotal 132 138 187 458 INDIRECTS      EPCM 56 40 4 100      Owners Cost 103 25 - 128      Customs Duties 29 22 38 90      Closure - - 69 69 Subtotal 188 88 111 387 CAPITAL EXPENDITURE BEFORE CONTINGENCY 968 690 1,234 2,893      Contingency 110 88 62 259 CAPITAL EXPENDITURE AFTER CONTINGENCY 1,078 778 1,295 3,152

     

    Cannot view this image? Visit: https://media.zenfs.com/en-us/newsfile_64/afa9aef52a578fe0f3ababf8fef7e1a9

    More

    Figure 7. Capital intensity for large-scale copper projects.

    To view an enhanced version of figure 7, please visit:https://orders.newsfilecorp.com/files/3396/42671_1589eb07840f79c5_012full.jpg

    Note: Recently approved, probable and practicable projects with nominal copper production capacity in excess of 200 kt/a (based on public disclosure and information gathered in the process of routine research). Source: Wood Mackenzie (based on public disclosure, the Kakula 2019 PFS has not been reviewed by Wood Mackenzie).

    The after-tax NPV sensitivity to copper price variation is shown in Table 7 for copper prices from US$2.00/lb to US$4.00/lb. The annual and cumulative cash flows are shown in figure 8.

    Table 7. Kakula Mine copper price sensitivity.

    After-Tax NPV (US$M) Copper price - US$/lb Discount Rate 2.00 2.50 3.00 3.10 3.50 4.00 Undiscounted 4,541 8,656 12,757 13,575 16,840 20,920 4.0% 2,694 5,298 7,892 8,411 10,478 13,061 6.0% 2,070 4,194 6,310 6,733 8,418 10,525 8.0% 1,581 3,339 5,090 5,440 6,835 8,577 10.0% 1,195 2,670 4,138 4,432 5,600 7,060 12.0% 887 2,140 3,386 3,635 4,626 5,863 IRR 22.7% 34.7% 45.0% 46.9% 54.1% 62.5%

     

    Cannot view this image? Visit: https://media.zenfs.com/en-us/newsfile_64/5b1b9ce19de91d4d38e45b06cbc6b6f6

    More

    Figure 8. Kakula Mine projected annual and cumulative cash flow.

    To view an enhanced version of figure 8, please visit:https://orders.newsfilecorp.com/files/3396/42671_1589eb07840f79c5_013full.jpg

    Figure by OreWin 2019.

    Kamoa and Kakula 2019 Mineral Resources

    The 2019 Kamoa and Kakula Indicated and Inferred Mineral Resource assay was prepared by George Gilchrist, Ivanhoe Mines' Mineral Resources Manager, under the direction of Dr. Harry Parker and Gordon Seibel, both RM SME, of Amec Foster Wheeler, of Reno, USA, and is reported in accordance with the 2014 CIM Definition Standards for Mineral Resources and Mineral Reserves. Dr. Parker and Mr. Seibel are the Qualified Persons for the estimate.

    The total, combined Indicated and Inferred Mineral Resources for the Kamoa-Kakula Project is shown in Table 8. Tables showing the Indicated and Inferred Mineral Resources separately for the Kamoa and Kakula deposits, as well as the sensitivity of Mineral Resources to cut-off grade, are shown in the appendices to this release.

    Table 8. Total Kamoa and Kakula Indicated and Inferred Mineral Resource (at 1% total copper cut-off grade).

    Deposit Category Tonnes (millions) Area(Sq. km) Copper Grade(%) Vertical Thickness (m) Contained Copper(kt) Contained Copper (billion lbs) Kamoa Indicated 759 50.7 2.57 5.5 19,500 43.0 Inferred 202 19.4 1.85 3.8 3,740 8.2 Kakula Indicated 628 21.5 2.72 10.5 17,100 37.6 Inferred 114 5.9 1.59 6.9 1,810 4.0 Total Kamoa-Kakula Project Indicated 1,387 72.2 2.64 6.9 36,600 80.6 Inferred 316 25.3 1.76 4.5 5,550 12.2

     

    Notes to conduct the total, combined Kamoa and Kakula 2019 Mineral Resource table

  • Ivanhoe's Mineral Resources Manager George Gilchrist, a Fellow of the Geology Society of South Africa and Professional Natural Scientist (Pr. Sci. Nat) with the South African Council for Natural Scientific Professions (SACNASP), estimated the Mineral Resources under the supervision of Dr. Harry Parker and Gordon Seibel, both Registered Members (RM) of the Society for Mining, Metallurgy and Exploration (SME), employees of Amec Foster Wheeler, who are the Qualified Persons for the Mineral Resource estimate. The effective date of the assay for Kamoa is November 27, 2017, and the cut-off date for drill data is November 23, 2015. The Kakula Mineral Resource is a combination of separate Kakula and Kakula West models, with the West Scarp failing forming the border between the two. The effective date of the assay for Kakula is April 13, 2018, and the cut-off date for the drill data is January 26, 2018. The effective date of the assay for Kakula West is November 10, 2018, and the cut-off date for the drill data is November 1, 2018. Mineral Resources are estimated using the CIM 2014 Definition Standards for Mineral Resources and Mineral Reserves. Mineral Resources are reported inclusive of Mineral Reserves on a 100% basis.
  • Mineral Resources are reported using a total copper (TCu) cut-off grade of 1% TCu and a minimum vertical thickness of 3 metres (m). There are reasonable prospects for eventual economic extraction under assumptions of a copper price of US$3.00/lb, employment of underground mechanized room-and-pillar and drift-and-fill mining methods, and that copper concentrates will live produced and sold to a smelter. Mining costs are assumed to live US$27/t. Concentrator, tailings treatment, and universal and administrative costs (G&A) are assumed to live US$17/t. Metallurgical recoveries are expected to detached 84% (86% for hypogene and 81% for supergene). At a 1% TCu cut-off grade, assumed net smelter returns for 100% of Mineral Resource blocks will cover processing, tailings treatment and G&A costs.
  • Reported Mineral Resources hold no allowances for hangingwall or footwall contact border loss and dilution. No mining recovery has been applied.
  • Depth of mineralization below the surface ranges from 10 m to 1,320 m for Indicated Mineral Resources and 20 m to 1,560 m for Inferred Mineral Resources.
  • Approximate drill cavity spacings are 800 m for Inferred Mineral Resources and 400 m for Indicated Mineral Resources.
  • Rounding as required by reporting guidelines may result in clear-cut summation differences between tonnes, grade and contained metal content.
  • Kakula 2019 PFS Mineral Reserve

    The Kakula 2019 PFS Mineral Reserve has been estimated by Qualified Person Jon Treen, Senior Vice President, Stantec Consulting International LLC, using the 2014 CIM Definition Standards for Mineral Resources and Mineral Reserves to conform to the Canadian National Instrument 43-101 Standards of Disclosure for Mineral Projects. The total Mineral Reserve for the Kakula Project is shown in Table 9. The Mineral Reserve is based on the April 2018 Mineral Resource. The Mineral Reserve is entirely a Probable Mineral Reserve that was converted from Indicated Mineral Resources. The effective date of the Mineral Reserve statement is February 1, 2019.

    Table 9. Kakula 2019 PFS Mineral Reserve Statement.

    Tonnage(Mt) Copper(%) Copper(Contained Mlb) Copper(Contained kt) Proven Mineral Reserve - - - - Probable Mineral Reserve 119.7 5.48 14,475 6,566 Mineral Reserve 119.7 5.48 14,475 6,566

     

    Notes to conduct Kakula 2019 PFS Mineral Reserve table

  • The copper price used for calculating the monetary analysis is long-term copper at US$3.10/lb. The analysis has been calculated with assumptions for smelter refining and treatment charges, deductions and payment terms, concentrate transport, metallurgical recoveries, and royalties.
  • For mine planning, the copper price used to figure screen model Net Smelter Returns (NSRs) was US$3.00/lb.
  • An elevated cut-off of US$100.00/t NSR was used to define the stoping blocks. A marginal cut-off of US$80.00/t NSR was used to define ore and waste.
  • Indicated Mineral Resources were used to report Probable Mineral Reserves.
  • Tonnage and grade estimates involve dilution and recovery allowances.
  • The Mineral Reserves reported above are not additive to the Mineral Resources.
  • The Kakula 2019 PFS Mineral Reserve targeted in the mine contrivance focused on maximizing the grade profile for a 6 Mtpa plenary production rate for 15 years, a five-year ramp-up, plus an 85% extraction and recovery allowance. As such, a compass of NSR cut-offs were evaluated that identified a targeted resource of approximately 125 million tonnes at the highest NSR.

    Tonnes and grades were calculated for the mining blocks, and allowances for unplanned dilution and mining recovery were applied to assay the Mineral Reserve Statement.

    Expanded 18 Mtpa progress scenario for the Kakula and Kamoa deposits

    The Kamoa-Kakula 2019 PEA furthermore assesses an alternative progress option of mining several deposits on the Kamoa-Kakula Project as an integrated, 18 Mtpa mining, processing and smelting complex, built in three stages. This scenario envisages the construction and operation of three separate mines: first, an initial 6 Mtpa mining operation would live established at the Kakula Mine on the Kakula Deposit; this is followed by a subsequent, separate 6 Mtpa mining operation at the Kansoko Mine using the existing twin declines that were completed in 2017; a third 6 Mtpa mine then will live established at the Kakula West Mine.

    As the resources at the Kakula, Kansoko and Kakula West mines are mined out, production would open sequentially at four other mines in the Kamoa North area to maintain throughput of 18 Mtpa to the then existing concentrator and smelter complex, as illustrated in figure 2.

    Each mining operation is expected to live a separate underground mine with a shared processing facility and surface infrastructure located at Kakula. Included in this scenario is the construction of a direct-to-blister sparkle copper smelter with a capacity of one million tonnes of copper concentrate per annum.

    The Kamoa-Kakula 2019 PEA is preparatory in nature and includes an economic analysis that is based, in part, on Inferred Mineral Resources. Inferred Mineral Resources are considered too speculative geologically for the application of economic considerations that would allow them to live categorized as Mineral Reserves - and there is no conviction that the results will live realized. Mineral Resources finish not Have demonstrated economic viability and are not Mineral Reserves.

    Summary of the PEA's key results for the 18 Mtpa progress scenario

  • Very-high-grade initial side projected to Have a grade of 7.1% copper in the second year of production and an detached grade of 5.7% copper during the first 10 years of operations, resulting in estimated detached annual copper production of 386,000 tonnes.
  • Recovered copper production is estimated at 740,000 tonnes in year 12, which would rank the Kamoa-Kakula Project as the second largest copper producer in the world.
  • Initial capital cost, including contingency, is US$1.1 billion, with subsequent expansions at Kansoko, Kakula West, and other mining areas, as well as the smelter, to live funded by cash flows from the Kakula Mine.
  • Average total cash costs of US$0.93/lb copper during the first 10 years, including sulphuric acid credits.
  • After-tax NPV, at an 8% discount rate, of US$10.0 billion.
  • After-tax IRR of 40.9% and a payback era of 2.9 years.
  • Key results of this potential progress scenario are summarized in tables 10, 11 and 12, and figures 9 & 10.

    Cannot view this image? Visit: https://media.zenfs.com/en-us/newsfile_64/935cd442ed6bb5b1e09a208b6e053c63

    More

    Photo: On December 4, 2018, they congratulated their Kamoa-Kakula employees and contractors for their outstanding workplace achievement of logging a total of 12 million hours without any lost-time injuries - the equivalent of approximately seven years of project progress. Their success is testament to the safety-focused culture that is a foundation of the conduct of the project's mine progress and exploration activities.

    To view an enhanced version of this photo, please visit:https://orders.newsfilecorp.com/files/3396/42671_1589eb07840f79c5_014full.jpg

    Table 10. 18 Mtpa Kamoa-Kakula 2019 PEA results summary.

    Item Unit Total Total Processed      Quantity Milled kt 535,217      Copper Feed Grade % 3.88 Total Concentrate Produced      Copper Concentrate Produced kt (dry) 39,039      Copper Concentrate - External Smelter kt (dry) 8,491      Copper Concentrate - Internal Smelter kt (dry) 30,549      Copper Recovery % 85.12      Copper Concentrate Grade % 45.23      Cont. Copper in Conc. - External Smelter Mlb 9,930      Cont. Copper in Conc. - External Smelter kt 4,504      Cont. Copper in Blister - Internal Smelter Mlb 28,559      Cont. Copper in Blister - Internal Smelter kt 12,954      Peak Annual Recovered Copper Production kt 740 10 Year Average      Copper Feed Grade % 5.66      Copper Concentrate Produced kt (dry) 759      Cont. Copper in Conc. - External Smelter kt 121      Cont. Copper in Blister - Internal Smelter kt 261      Mine Site Cash Cost (Including Smelter) US$/lb payable 0.63      Total Cash Cost (After Credits) US$/lb payable 0.93 Key monetary Results      Peak Funding US$M 1,099      Initial Capital Costs US$M 1,078      Expansion Capital Costs US$M 4,958      LOM Avg. Mine Site Cash Cost (Including Smelter) US$/lb payable 0.86      LOM Avg. Total Cash Costs (After Credits) US$/lb payable 1.10      Site Operating Costs US$/t Milled 61.5      After-Tax NPV8% US$M 10,030      After-Tax IRR % 40.9      Project Payback Years 2.9      Project Life Years 37

     

    Table 11. 18 Mtpa Kamoa-Kakula 2019 PEA unit operating costs.

    US$/lb Payable Copper YEARS 1-5 YEARS 1-10 LOMAVERAGE Mine Site (ex-Smelter) 0.46 0.53 0.75 Smelter 0.04 0.09 0.11 Transport 0.25 0.17 0.15 Treatment & Refining Charges 0.12 0.08 0.08 Royalties & Export Tax 0.18 0.16 0.16 Total Cash Costs Before Credits 1.05 1.04 1.25 Sulphuric Acid Credits1 0.03 0.11 0.15 Total Cash Costs After Credits 1.02 0.93 1.10

     

  • Assumes a sulphuric acid price of US$250 per tonne.
  • Table 12. 18 Mtpa Kamoa-Kakula 2019 PEA copper price sensitivity.

    After-Tax NPV (US$M) Copper price (US$/lb) Discount Rate 2.00 2.50 3.00 3.10 3.50 4.00 Undiscounted 13,117 25,902 38,668 41,222 51,435 64,154 4.0% 5,684 11,850 18,008 19,240 24,165 30,307 6.0% 3,788 8,311 12,828 13,731 17,341 21,845 8.0% 2,510 5,931 9,347 10,030 12,758 16,164 10.0% 1,627 4,286 6,939 7,469 9,587 12,231 12.0% 1,005 3,120 5,229 5,651 7,332 9,433 IRR 18.0% 28.9% 39.0% 40.9% 48.3% 57.0%

     

    Cannot view this image? Visit: https://media.zenfs.com/en-us/newsfile_64/27a0d99d1762efc27f327b20b57fe9a6

    More

    Figure 9. 18 Mtpa Kamoa-Kakula 2019 PEA scenario mill feed and grade profile.

    To view an enhanced version of figure 9, please visit:https://orders.newsfilecorp.com/files/3396/42671_1589eb07840f79c5_015full.jpg

    Figure by OreWin 2019.

    Cannot view this image? Visit: https://media.zenfs.com/en-us/newsfile_64/2330f8d9a7db45d787efd11281663fa0

    More

    Figure 10. 18 Mtpa Kamoa-Kakula 2019 PEA scenario concentrate and copper production.

    To view an enhanced version of figure 10, please visit:https://orders.newsfilecorp.com/files/3396/42671_1589eb07840f79c5_016full.jpg

    Figure by OreWin 2019.

    Cannot view this image? Visit: https://media.zenfs.com/en-us/newsfile_64/1d3f2dfe2a79fed9edfc8774fbb8d36c

    More

    Figure 11. Projected 18 Mtpa Kamoa-Kakula PEA production (year-12 peak copper production shown) compared to the world's projected top 20 producing mines in 2025 by paid copper production.

    To view an enhanced version of figure 11, please visit:https://orders.newsfilecorp.com/files/3396/42671_1589eb07840f79c5_017full.jpg

    Note: Kamoa-Kakula 2019 PEA production based on projected peak copper production (which occurs in year 12) of the 18 Mtpa alternative progress option.

    Source: Wood Mackenzie (based on public disclosure, the Kakula 2019 PFS has not been reviewed by Wood Mackenzie).

    Cannot view this image? Visit: https://media.zenfs.com/en-us/newsfile_64/d7c846e2fb97260d20356625aaa69b46

    More

    Figure 12. Nominal production and head grade of the world's top 10 largest new greenfield projects.

    To view an enhanced version of figure 12, please visit:https://orders.newsfilecorp.com/files/3396/42671_1589eb07840f79c5_018full.jpg

    Note: Top 10 largest new greenfield copper projects defined as the 10 largest greenfield copper projects classified by Wood Mackenzie as "base case" or "probable" and ranked by nominal copper production (with the Kamoa-Kakula 2019 PEA and Kakula 2019 PFS's respective first 10 years' detached annual production of copper in concentrate considered to live its nominal copper production).

    Source: Wood Mackenzie, USGS (based on public disclosure, the Kamoa-Kakula 2019 PEA and Kakula 2019 PFS Have not been reviewed by Wood Mackenzie).

    Kakula to live mined primarily using drift-and-fill method

    The Kakula 2019 PFS mine access is via twin declines on the north side (which Have been completed) and a single decline on the south side of the deposit. One of the north declines will serve as the primary mine access, while the other will involve the conveyor haulage system. The south decline will serve as a secondary operational ingress/egress and will facilitate censorious early mine development.

    From the bottom of the north and south declines, a pair of perimeter drifts will live driven to the east and west extremities of the deposit and will serve as the primary accesses to the production areas. These drifts furthermore will live used as the primary intake and exhaust ventilation circuits and will connect with a series of intake and exhaust ventilation shafts.

    The primary ore handling system will involve perimeter conveyor drifts and load-out points along the north side of the deposit. The perimeter conveyor drifts will terminate at the main conveyor decline. Connection drifts between the north and south perimeter drifts will provide access and ventilation to the planned mining areas. The mining methods for the Kakula Deposit are drift-and-fill using paste backfill, and room-and-pillar. Approximately 99% of the deposit will live mined using drift-and-fill, which was chosen to maximize the extraction of high-grade Kakula ore. Mine access and primary progress are shown in figure 13.

    Cannot view this image? Visit: https://media.zenfs.com/en-us/newsfile_64/125eb771dc4206c0f0902c0580d935ff

    More

    Figure 13. Kakula 2019 PFS mine development.

    To view an enhanced version of figure 13, please visit:https://orders.newsfilecorp.com/files/3396/42671_1589eb07840f79c5_019full.jpg

    Figure by Stantec 2019.

    Kakula 2019 PFS concentrator design similar to the PEA

    The Kakula concentrator would live constructed in a phased approach with two 3 Mtpa modules as the mining operations ramp-up to plenary production of 6 Mtpa.

    The Kakula concentrator design incorporates a run-of-mine stockpile, followed by two stages of screening and crushing on surface. The crushed material with a size distribution of 80% passing (or P80) eight millimetres (mm), is fed into a two-stage ball-milling circuit for further size reduction to a target grind size 80% passing 53 micrometres (µm).

    The milled slurry will live passed through a rougher and scavenger flotation. The high-grade, or fast-floating rougher concentrate, and medium-grade, or slow-floating scavenger concentrate, will live collected separately. The rougher concentrate is upgraded in the low entrainment high-grade cleaner stage to bear a high-grade concentrate.

    The medium-grade scavenger concentrate together with the tailings from the rougher cleaning stage and the tailings from the scavenger recleaner stage will live combined and further upgraded in the scavenger cleaner circuit. The concentrate produced from the scavenger cleaner circuit, representing roughly 12% of the mill feed, will live re-ground to a P80 of 10µm prior to final cleaning in the low entrainment scavenger recleaner stage.

    The scavenger recleaner concentrate then will live combined with the high-grade cleaner concentrate to contour the final concentrate. The final concentrate will live thickened before being pumped to the concentrate filter where the filter cake then will live bagged for shipment to market.

    The tailings will flood through a series of cyclones at the backfill plant utilizing 55% of the tailings for backfill. The remaining 45% of the tailings will live pumped to the tailings storage facility.

    Cannot view this image? Visit: https://media.zenfs.com/en-us/newsfile_64/da7fb77823da75e066551e331b766ffe

    More

    Photo. Hongbing Li and Lydia Makong, Kamoa-Kakula geologists, and David Edwards, Geology Manager, Kamoa Copper Project (right), reviewing a chart of recent drill holes at the Kamoa North Discovery ─ including cavity DD1450 that intersected 22.3 metres of 13.05% copper (at a 2% cut-off grade), genesis at a depth of only 190 metres below surface.

    To view an enhanced version of this photo, please visit:https://orders.newsfilecorp.com/files/3396/42671_1589eb07840f79c5_020full.jpg

    Cannot view this image? Visit: https://media.zenfs.com/en-us/newsfile_64/1fa3ea29ac9b716eb7429a50d31a815a

    More

    Photo. Eco-livelihoods staff with pineapples harvested at the Kamoa-Kakula Project garden. Production and sale of pineapples is one of the new, community socio-economic projects supported by the Kamoa Copper Sustainable Livelihoods Program, and helps provide local community members with opportunities to merit additional income.

    To view an enhanced version of this photo, please visit:https://orders.newsfilecorp.com/files/3396/42671_1589eb07840f79c5_021full.jpg

    Qualified persons

    The following companies Have undertaken work in preparation of the Kakula 2019 PFS, Kamoa 2019 PFS and Kamoa-Kakula 2019 PEA:

  • OreWin - Overall report preparation, mining, logistics, power and economic analysis.
  • Amec Foster Wheeler - Mineral Resource estimation.
  • DRA Global - Mine surface infrastructure and metallurgical processing.
  • KGHM Cuprum - Technical advisor on inescapable mining methods and geotechnical.
  • SRK Consulting - Mine geotechnical recommendations.
  • Stantec - Mining and Mineral Reserves.
  • The independent Qualified Persons accountable for preparing the Kakula 2019 PFS, Kamoa 2019 PFS and Kamoa-Kakula 2019 PEA, on which the technical report will live based, are Bernard Peters (OreWin); Dr. Harry Parker (Amec Foster Wheeler); Gordon Seibel (Amec Foster Wheeler); Marius Phillips (DRA Global); Greg Ruiter (DRA Global); William Joughin (SRK); and Jon Treen (Stantec). Each Qualified Person has reviewed and approved the information in this tidings release apposite to the portion of the Kakula 2019 PFS, Kamoa 2019 PFS and Kamoa-Kakula 2019 PEA for which they are responsible.

    Other scientific and technical information in this tidings release has been reviewed and approved by Stephen Torr, P.Geo., Ivanhoe Mines' Vice President, Project Geology and Evaluation, a Qualified Person under the terms of National Instrument 43-101. Mr. Torr is not independent of Ivanhoe Mines. Mr. Torr has verified the technical data disclosed in this tidings release.

    Wood Mackenzie provided data based on public disclosure of comparable copper projects for the compilation of inescapable figures used in this release; however, Wood Mackenzie did not review the Kakula 2019 PFS or Kamoa-Kakula 2019 PEA.

    Data verification and trait control and assurance

    Amec Foster Wheeler reviewed the sample chain of custody, trait assurance and control procedures, and qualifications of analytical laboratories. Amec Foster Wheeler is of the sentiment that the procedures and QA/QC control are acceptable to support Mineral Resource estimation. Amec Foster Wheeler furthermore audited the assay database, core logging and geological interpretations on a number of occasions between 2009 and 2018 and has organize no material issues with the data as a result of these audits.

    In the sentiment of the Amec Foster Wheeler Qualified Persons, the data verification programs undertaken on the data collected from the Kamoa-Kakula Project support the geological interpretations. The analytical and database trait and the data collected can support Mineral Resource estimation.

    Ivanhoe Mines maintains a comprehensive chain of custody and QA/QC program on assays from its Kamoa-Kakula Copper Project. Half-sawn core is processed at its on-site preparation laboratory in Kamoa, prepared samples then are shipped by secure courier to Bureau Veritas Minerals (BVM) Laboratories in Australia, an ISO17025 accredited facility. Copper assays are determined at BVM by mixed-acid digestion with ICP finish. Industry-standard certified reference materials and blanks are inserted into the sample stream prior to dispatch to BVM. For minute information about assay methods and data verification measures used to support the scientific and technical information, please refer to the Kamoa-Kakula 2018 Resource Update, March 2018 technical report available on the SEDAR profile of Ivanhoe Mines at www.sedar.com or under technical reports on the Ivanhoe Mines website at www.ivanhoemines.com.

    About Ivanhoe Mines

    Ivanhoe Mines is a Canadian mining company focused on advancing its three principal projects in Southern Africa: the progress of new mines at the Kamoa-Kakula copper discovery in the Democratic Republic of Congo (DRC) and the Platreef palladium-platinum-nickel-copper-gold discovery in South Africa; and the extensive redevelopment and upgrading of the historic Kipushi zinc-copper-germanium-silver mine, furthermore in the DRC.

    Information contacts

    InvestorsBill Trenaman +1.604.331.9834

    MediaNorth America: Kimberly Lim +1.778.996.8510South Africa: Jeremy Michaels +27.82.939.4812

    Cautionary statement on forward-looking information

    Certain statements in this release constitute "forward-looking statements" or "forward-looking information" within the signification of applicable securities laws, including without limitation: (i) the results of the Kakula 2019 PFS, the Kamoa-Kakula 2019 PEA and the Kamoa 2019 PFS, including the progress of a 6 Mtpa operation at Kakula and an expended 18 Mtpa at Kakula-Kamoa; (ii) statements regarding the construction of the mine at any of the deposits; (iii) the construction of a direct-to-blister sparkle copper smelter with a capacity of one million tonnes of copper concentrate; (iv) the progress of mines at Kamoa North; and (v) mining at Kakula to live primarily using the drift and fill method; and (vi) the design and specifications of the Kakula concentrator.

    Such statements involve known and unknown risks, uncertainties and other factors which may intuition the actual results, performance or achievements of Ivanhoe Mines, or industry results, to live materially different from any future results, performance or achievements expressed or implied by such forward-looking statements or information. Such statements can live identified by the spend of words such as "may", "would", "could", "will", "intend", "expect", "believe", "plan", "anticipate", "estimate", "scheduled", "forecast", "predict" and other similar terminology, or state that inescapable actions, events or results "may", "could", "would", "might" or "will" live taken, occur or live achieved. These statements reflect the Ivanhoe Mine's current expectations regarding future events, performance and results and speak only as of the date of this tidings release.

    As well, each and every of the results of the Kakula 2019 PFS, the Kamoa-Kakula 2019 PEA and the Kamoa 2019 PFS constitute forward-looking information or statements, including estimates of internal rates of recur after-tax of 46.9% (Kakula) and 40.9% (Kamoa-Kakula) with payback periods of 2.6 years and 2.9 years respectively; net present value including a Kakula project NPV at an 8% discount rate of US$5.4 billion and a Kamoa-Kakula project NPV at an 8% discount rate of US$10.0 billion; future production forecasts and projects, including detached annual production of 291,000 tonnes of copper and up to 360,000 tonnes of copper by year four at Kakula and detached annual production of 386,000 tonnes of copper and 740,000 tonnes of copper by year 12 at Kamoa-Kakula; estimates of cash cost including mine site cash cost of US$0.46 per pound at total cash cost of US $1.11 per pound at Kakula, and total cash cost of US$0.93 per pound of copper during the first 10 years of production at Kamoa-Kakula; mine life estimates, including a 25 year mine life at Kakula and a 37 year mine life at Kamoa-Kakula; initial capital costs at Kakula and Kamoa-Kakula of US$1.1 billion; detached copper grades over production of 6.4% at Kakula and 5.7% at Kamoa-Kakula during the first 10 years of operations; cash flood forecasts; estimates of copper recoveries of 85.3% at Kakula and 85.1% at Kamoa-Kakula.

    Furthermore, with respect to this specific forward-looking information concerning the progress scenarios for the Kamoa-Kakula Copper Project, Ivanhoe Mines has based its assumptions and analysis on inescapable factors that are inherently uncertain. Uncertainties involve among others: (i) the adequacy of infrastructure (including the rehabilitation of the Koni and Mwadingusha, and accessibility and viability of rail links); (ii) unforeseen changes in geological characteristics; (iii) changes in the metallurgical characteristics of the mineralization; (iv) the ability to develop adequate processing capacity; (v) the price of copper; (vi) the availability of paraphernalia and facilities necessary to complete development; (vii) the size of future processing plants and future mining rates; (viii) the cost of consumables and mining and processing equipment; (ix) unforeseen technological and engineering problems; (x) accidents or acts of sabotage or terrorism; (xi) currency fluctuations; (xii) changes in laws or regulations; (xiii) the availability and productivity of skilled labour; (xiv) the regulation of the mining industry by various governmental agencies; (xv) political factors, including political stability; (xvi) the availability of financing; and (xvii) the completion of the railway upgrade between Kolwezi and Dilolo.

    This release furthermore contains references to estimates of Mineral Resources and Mineral Reserves. The estimation of Mineral Resources and Mineral Reserves is inherently uncertain and involves subjective judgments about many apposite factors. Mineral Resources that are not Mineral Reserves finish not Have demonstrated economic viability. The accuracy of any such estimates is a duty of the quantity and trait of available data, and of the assumptions made and judgments used in engineering and geological interpretation (including estimated future production from the Kamoa-Kakula Copper Project, the anticipated tonnages and grades that will live mined and the estimated level of recovery that will live realized), which may prove to live unreliable and depend, to a inescapable extent, upon the analysis of drilling results and statistical inferences that may ultimately prove to live inaccurate. Mineral Resource or Mineral Reserve estimates may Have to live re-estimated based on: (i) fluctuations in copper price; (ii) results of drilling, (iii) the results of metallurgical testing and other studies, including their subsequent refinement and updating; (iv) proposed mining operations, including dilution; (v) the evaluation of mine plans subsequent to the date of any estimates; (vi) changes in mining or other costs, and (vii) the practicable failure to receive required permits, approvals and licenses or changes to existing mining licences.

    Forward-looking statements involve significant risks and uncertainties, should not live read as guarantees of future performance or results, and will not necessarily live accurate indicators of whether or not such results will live achieved. A number of factors could intuition actual results to vary materially from the results discussed in the forward-looking statements, including, but not limited to, the factors discussed here, as well as unexpected changes in laws, rules or regulations, or their enforcement by applicable authorities; the failure of parties to contracts with Ivanhoe Mines and its subsidiaries to accomplish as agreed; social, political or labour unrest; changes in commodity prices (and copper in particular); limitations and availability of capital; and the failure of exploration programs or studies to deliver anticipated results (including the actual results of drilling and exploration activities), or results that would justify and support continued exploration, studies, progress or operations.

    Although the forward-looking statements contained in this release are based upon what management of Ivanhoe Mines believes are reasonable assumptions, Ivanhoe Mines cannot assure investors that actual results will live consistent with these forward-looking statements. These forward-looking statements are made as of the date of this release and are expressly qualified in their entirety by this cautionary statement. Subject to applicable securities laws, Ivanhoe Mines does not assume any responsibility to update or revise the forward-looking statements contained herein to reflect events or circumstances occurring after the date of this release.

    Appendices - 2019 Kamoa and Kakula Mineral Resource tables, and sensitivity of Mineral Resources to cut-off grade tables.

    Table 13. Kamoa Indicated and Inferred Mineral Resource (at 1% TCu cut-off grade).

    Category Tonnage(Mt) Area(km2) Copper(%) Vertical Thickness(m) Contained Copper(kt) Contained Copper(billion lbs) Indicated 759 50.7 2.57 5.5 19,500 43.0 Inferred 202 19.4 1.85 3.8 3,740 8.2

     

  • Ivanhoe's Mineral Resources Manager George Gilchrist, a Fellow of the Geology Society of South Africa and Professional Natural Scientist (Pr. Sci. Nat) with the South African Council for Natural Scientific Professions (SACNASP), estimated the Mineral Resources under the supervision of Dr. Harry Parker and Gordon Seibel, both Registered Members (RM) of the Society for Mining, Metallurgy and Exploration (SME), employees of Amec Foster Wheeler, who are the Qualified Persons for the Mineral Resource estimate. The effective date of the assay is 27 November 2017 and the cut-off date for drill data is 23 November 2015. Mineral Resources are estimated using the CIM 2014 Definition Standards for Mineral Resources and Mineral Reserves. Mineral Resources are reported inclusive of Mineral Reserves on a 100% basis.
  • Mineral Resources are reported using a total copper (TCu) cut-off grade of 1% TCu and a minimum vertical thickness of 3 m. There are reasonable prospects for eventual economic extraction under assumptions of a copper price of US$3.00/lb, employment of underground mechanized room-and-pillar and drift-and-fill mining methods, and that copper concentrates will live produced and sold to a smelter. Mining costs are assumed to live US$27/t. Concentrator, tailings treatment, and universal and administrative costs (G&A) are assumed to live US$17/t. Metallurgical recoveries are expected to detached 84% (86% for hypogene and 81% for supergene). At a 1% TCu cut-off grade, assumed net smelter returns for 100% of Mineral Resource blocks will cover processing, tailings treatment and G&A costs.
  • Reported Mineral Resources hold no allowances for hangingwall or footwall contact border loss and dilution. No mining recovery has been applied.
  • Depth of mineralization below the surface ranges from 10 m to 1,320 m for Indicated Mineral Resources and 20 m to 1,560 m for Inferred Mineral Resources.
  • Approximate drill cavity spacings are 800 m for Inferred Mineral Resources and 400 m for Indicated Mineral Resources.
  • Rounding as required by reporting guidelines may result in clear-cut summation differences between tonnes, grade and contained metal content.
  • Table 14. Kakula Indicated and Inferred Mineral Resource (at 1% TCu cut-off grade).

    Category Tonnage(Mt) Area(km2) Copper(%) Vertical Thickness(m) Contained Copper (kt) Contained Copper(billion lbs) Indicated 628 21.5 2.72 10.5 17,100 37.6 Inferred 114 5.9 1.59 6.9 1,810 4.0

     

  • Ivanhoe's Mineral Resources Manager George Gilchrist, a Fellow of the Geology Society of South Africa and Professional Natural Scientist (Pr. Sci. Nat) with the South African Council for Natural Scientific Professions (SACNASP), estimated the Mineral Resources under the supervision of Dr. Harry Parker and Gordon Seibel, both Registered Members (RM) of the Society for Mining, Metallurgy and Exploration (SME), employees of Amec Foster Wheeler, who are the Qualified Persons for the Mineral Resources. The Mineral Resource is a combination of Kakula and Kakula West models, with the West Scarp failing forming the border between the two. The effective date of the assay for Kakula is 13 April 2018, and the cut-off date for the drill data is 26 January 2018. The effective date of the assay for Kakula West is 10 November 2018, and the cut-off date for the drill data is 1 November 2018. Mineral Resources are estimated using the CIM Definition Standards for Mineral Resources and Reserves (2014) and reported on a 100% basis. Mineral Resources are reported inclusive of Mineral Reserves on a 100% basis.
  • Mineral Resources are reported using a total copper (TCu) cut-off grade of 1% TCu and an approximate minimum thickness of 3 m. There are reasonable prospects for eventual economic extraction under assumptions of a copper price of US$3.00/lb, employment of underground, mechanized, room-and-pillar and drift-and-fill mining methods, and that copper concentrates will live produced and sold to a smelter. Mining costs are assumed to live US$42/t. Concentrator, tailings treatment and universal and administrative (G&A) costs are assumed to live US$18/t. Metallurgical recovery is assumed to detached 85%. Ivanhoe is studying reducing mining costs using a controlled convergence room-and-pillar method. At a 1% TCu cut-off grade, assumed net smelter returns for 100% of Mineral Resource blocks will cover concentrator, tailings treatment and G&A costs.
  • Reported Mineral Resources hold no allowances for hangingwall or footwall contact border loss and dilution. No mining recovery has been applied.
  • Approximate drill cavity spacings are 800 m for Inferred Mineral Resources and 400 m for Indicated Mineral Resources.
  • Rounding as required by reporting guidelines may result in clear-cut differences between tonnes, grade and contained metal content.
  • Table 15. Kamoa sensitivity of Mineral Resources to cut-off grade.

    Indicated Mineral Resource Cut-off(% Cu) Tonnage(Mt) Area(km2) Copper(%) Vertical Thickness(m) Contained Copper(kt) Contained Copper(billion lbs) 3.00 223 20.9 4.14 3.8 9,230 20.4 2.50 328 29.5 3.70 4.0 12,100 26.7 2.00 450 37.2 3.30 4.4 14,900 32.8 1.75 525 41.2 3.10 4.6 16,300 35.9 1.50 607 44.8 2.90 4.9 17,600 38.8 1.25 683 47.8 2.73 5.2 18,700 41.1 1.00 759 50.7 2.57 5.5 19,500 43.0 0.75 849 52.9 2.39 5.9 20,300 44.7 Inferred Mineral Resource 3.00 19 2.1 3.52 3.2 655 1.4 2.50 40 4.4 3.10 3.3 1,250 2.8 2.00 67 7.1 2.77 3.4 1,840 4.1 1.75 88 9.2 2.55 3.5 2,240 4.9 1.50 114 11.8 2.34 3.5 2,660 5.9 1.25 151 15.3 2.10 3.6 3,170 7.0 1.00 202 19.4 1.85 3.8 3,740 8.2 0.75 253 22.5 1.65 4.1 4,180 9.2

     

    The footnotes to Table 13 furthermore apply to this table.

    Table 16. Kakula sensitivity of Mineral Resources to cut-off grade.

    Indicated Mineral Resource Cut-off(% Cu) Tonnage(Mt) Area(km2) Copper(%) Vertical Thickness(m) Contained Copper(kt) Contained Copper(billion lbs) 7.0 39 3.2 8.97 4.1 3,460 7.6 6.0 53 4.4 8.29 4.2 4,390 9.7 5.0 77 6.3 7.41 4.3 5,690 12.6 4.0 107 8.4 6.58 4.5 7,070 15.6 3.0 164 11.7 5.50 4.9 9,010 19.9 2.5 217 14.3 4.82 5.4 10,500 23.1 2.0 319 17.4 3.99 6.5 12,700 28.1 1.5 434 19.4 3.40 8.0 14,700 32.5 1.0 628 21.5 2.72 10.5 17,100 37.6 Inferred Mineral Resource 4.0 1 0.1 4.40 3.4 32 0.1 3.0 5 0.4 3.52 3.9 163 0.4 2.5 11 1.0 3.09 3.7 325 0.7 2.0 23 2.1 2.62 3.9 604 1.3 1.5 47 3.9 2.16 4.3 1,010 2.2 1.0 114 5.9 1.59 6.9 1,810 4.0

     

    The footnotes to Table 14 furthermore apply to this table.

    Table 17. Kamoa and Kakula sensitivity of Mineral Resources to cut-off grade.

    Indicated Mineral Resource Cut-off(% Cu) Tonnage(Mt) Area(km2) Copper(%) Vertical Thickness(m) Contained Copper(kt) Contained Copper(billion lbs) 3.0 387 32.7 4.72 4.2 18,200 40.2 2.5 545 43.8 4.14 4.4 22,600 49.8 2.0 770 54.7 3.59 5.0 27,600 60.9 1.5 1,040 64.3 3.11 5.8 32,400 71.3 1.0 1,390 72.2 2.64 6.9 36,600 80.6 Inferred Mineral Resource 3.0 23 2.5 3.52 3.3 818 1.8 2.5 51 5.4 3.09 3.4 1,570 3.5 2.0 90 9.2 2.73 3.5 2,450 5.4 1.5 161 15.8 2.29 3.7 3,680 8.1 1.0 316 25.3 1.76 4.5 5,550 12.2

     

    The footnotes to tables 13 and 14 furthermore apply to this table.

    To view the source version of this press release, please visit https://www.newsfilecorp.com/release/42671



    Direct Download of over 5500 Certification Exams

    3COM [8 Certification Exam(s) ]
    AccessData [1 Certification Exam(s) ]
    ACFE [1 Certification Exam(s) ]
    ACI [3 Certification Exam(s) ]
    Acme-Packet [1 Certification Exam(s) ]
    ACSM [4 Certification Exam(s) ]
    ACT [1 Certification Exam(s) ]
    Admission-Tests [13 Certification Exam(s) ]
    ADOBE [93 Certification Exam(s) ]
    AFP [1 Certification Exam(s) ]
    AICPA [2 Certification Exam(s) ]
    AIIM [1 Certification Exam(s) ]
    Alcatel-Lucent [13 Certification Exam(s) ]
    Alfresco [1 Certification Exam(s) ]
    Altiris [3 Certification Exam(s) ]
    Amazon [2 Certification Exam(s) ]
    American-College [2 Certification Exam(s) ]
    Android [4 Certification Exam(s) ]
    APA [1 Certification Exam(s) ]
    APC [2 Certification Exam(s) ]
    APICS [2 Certification Exam(s) ]
    Apple [69 Certification Exam(s) ]
    AppSense [1 Certification Exam(s) ]
    APTUSC [1 Certification Exam(s) ]
    Arizona-Education [1 Certification Exam(s) ]
    ARM [1 Certification Exam(s) ]
    Aruba [8 Certification Exam(s) ]
    ASIS [2 Certification Exam(s) ]
    ASQ [3 Certification Exam(s) ]
    ASTQB [8 Certification Exam(s) ]
    Autodesk [2 Certification Exam(s) ]
    Avaya [101 Certification Exam(s) ]
    AXELOS [1 Certification Exam(s) ]
    Axis [1 Certification Exam(s) ]
    Banking [1 Certification Exam(s) ]
    BEA [5 Certification Exam(s) ]
    BICSI [2 Certification Exam(s) ]
    BlackBerry [17 Certification Exam(s) ]
    BlueCoat [2 Certification Exam(s) ]
    Brocade [4 Certification Exam(s) ]
    Business-Objects [11 Certification Exam(s) ]
    Business-Tests [4 Certification Exam(s) ]
    CA-Technologies [20 Certification Exam(s) ]
    Certification-Board [10 Certification Exam(s) ]
    Certiport [3 Certification Exam(s) ]
    CheckPoint [43 Certification Exam(s) ]
    CIDQ [1 Certification Exam(s) ]
    CIPS [4 Certification Exam(s) ]
    Cisco [318 Certification Exam(s) ]
    Citrix [48 Certification Exam(s) ]
    CIW [18 Certification Exam(s) ]
    Cloudera [10 Certification Exam(s) ]
    Cognos [19 Certification Exam(s) ]
    College-Board [2 Certification Exam(s) ]
    CompTIA [76 Certification Exam(s) ]
    ComputerAssociates [6 Certification Exam(s) ]
    Consultant [2 Certification Exam(s) ]
    Counselor [4 Certification Exam(s) ]
    CPP-Institute [4 Certification Exam(s) ]
    CSP [1 Certification Exam(s) ]
    CWNA [1 Certification Exam(s) ]
    CWNP [13 Certification Exam(s) ]
    CyberArk [1 Certification Exam(s) ]
    Dassault [2 Certification Exam(s) ]
    DELL [11 Certification Exam(s) ]
    DMI [1 Certification Exam(s) ]
    DRI [1 Certification Exam(s) ]
    ECCouncil [22 Certification Exam(s) ]
    ECDL [1 Certification Exam(s) ]
    EMC [128 Certification Exam(s) ]
    Enterasys [13 Certification Exam(s) ]
    Ericsson [5 Certification Exam(s) ]
    ESPA [1 Certification Exam(s) ]
    Esri [2 Certification Exam(s) ]
    ExamExpress [15 Certification Exam(s) ]
    Exin [40 Certification Exam(s) ]
    ExtremeNetworks [3 Certification Exam(s) ]
    F5-Networks [20 Certification Exam(s) ]
    FCTC [2 Certification Exam(s) ]
    Filemaker [9 Certification Exam(s) ]
    Financial [36 Certification Exam(s) ]
    Food [4 Certification Exam(s) ]
    Fortinet [14 Certification Exam(s) ]
    Foundry [6 Certification Exam(s) ]
    FSMTB [1 Certification Exam(s) ]
    Fujitsu [2 Certification Exam(s) ]
    GAQM [9 Certification Exam(s) ]
    Genesys [4 Certification Exam(s) ]
    GIAC [15 Certification Exam(s) ]
    Google [4 Certification Exam(s) ]
    GuidanceSoftware [2 Certification Exam(s) ]
    H3C [1 Certification Exam(s) ]
    HDI [9 Certification Exam(s) ]
    Healthcare [3 Certification Exam(s) ]
    HIPAA [2 Certification Exam(s) ]
    Hitachi [30 Certification Exam(s) ]
    Hortonworks [4 Certification Exam(s) ]
    Hospitality [2 Certification Exam(s) ]
    HP [752 Certification Exam(s) ]
    HR [4 Certification Exam(s) ]
    HRCI [1 Certification Exam(s) ]
    Huawei [21 Certification Exam(s) ]
    Hyperion [10 Certification Exam(s) ]
    IAAP [1 Certification Exam(s) ]
    IAHCSMM [1 Certification Exam(s) ]
    IBM [1533 Certification Exam(s) ]
    IBQH [1 Certification Exam(s) ]
    ICAI [1 Certification Exam(s) ]
    ICDL [6 Certification Exam(s) ]
    IEEE [1 Certification Exam(s) ]
    IELTS [1 Certification Exam(s) ]
    IFPUG [1 Certification Exam(s) ]
    IIA [3 Certification Exam(s) ]
    IIBA [2 Certification Exam(s) ]
    IISFA [1 Certification Exam(s) ]
    Intel [2 Certification Exam(s) ]
    IQN [1 Certification Exam(s) ]
    IRS [1 Certification Exam(s) ]
    ISA [1 Certification Exam(s) ]
    ISACA [4 Certification Exam(s) ]
    ISC2 [6 Certification Exam(s) ]
    ISEB [24 Certification Exam(s) ]
    Isilon [4 Certification Exam(s) ]
    ISM [6 Certification Exam(s) ]
    iSQI [7 Certification Exam(s) ]
    ITEC [1 Certification Exam(s) ]
    Juniper [65 Certification Exam(s) ]
    LEED [1 Certification Exam(s) ]
    Legato [5 Certification Exam(s) ]
    Liferay [1 Certification Exam(s) ]
    Logical-Operations [1 Certification Exam(s) ]
    Lotus [66 Certification Exam(s) ]
    LPI [24 Certification Exam(s) ]
    LSI [3 Certification Exam(s) ]
    Magento [3 Certification Exam(s) ]
    Maintenance [2 Certification Exam(s) ]
    McAfee [8 Certification Exam(s) ]
    McData [3 Certification Exam(s) ]
    Medical [68 Certification Exam(s) ]
    Microsoft [375 Certification Exam(s) ]
    Mile2 [3 Certification Exam(s) ]
    Military [1 Certification Exam(s) ]
    Misc [1 Certification Exam(s) ]
    Motorola [7 Certification Exam(s) ]
    mySQL [4 Certification Exam(s) ]
    NBSTSA [1 Certification Exam(s) ]
    NCEES [2 Certification Exam(s) ]
    NCIDQ [1 Certification Exam(s) ]
    NCLEX [3 Certification Exam(s) ]
    Network-General [12 Certification Exam(s) ]
    NetworkAppliance [39 Certification Exam(s) ]
    NI [1 Certification Exam(s) ]
    NIELIT [1 Certification Exam(s) ]
    Nokia [6 Certification Exam(s) ]
    Nortel [130 Certification Exam(s) ]
    Novell [37 Certification Exam(s) ]
    OMG [10 Certification Exam(s) ]
    Oracle [282 Certification Exam(s) ]
    P&C [2 Certification Exam(s) ]
    Palo-Alto [4 Certification Exam(s) ]
    PARCC [1 Certification Exam(s) ]
    PayPal [1 Certification Exam(s) ]
    Pegasystems [12 Certification Exam(s) ]
    PEOPLECERT [4 Certification Exam(s) ]
    PMI [15 Certification Exam(s) ]
    Polycom [2 Certification Exam(s) ]
    PostgreSQL-CE [1 Certification Exam(s) ]
    Prince2 [6 Certification Exam(s) ]
    PRMIA [1 Certification Exam(s) ]
    PsychCorp [1 Certification Exam(s) ]
    PTCB [2 Certification Exam(s) ]
    QAI [1 Certification Exam(s) ]
    QlikView [1 Certification Exam(s) ]
    Quality-Assurance [7 Certification Exam(s) ]
    RACC [1 Certification Exam(s) ]
    Real Estate [1 Certification Exam(s) ]
    Real-Estate [1 Certification Exam(s) ]
    RedHat [8 Certification Exam(s) ]
    RES [5 Certification Exam(s) ]
    Riverbed [8 Certification Exam(s) ]
    RSA [15 Certification Exam(s) ]
    Sair [8 Certification Exam(s) ]
    Salesforce [5 Certification Exam(s) ]
    SANS [1 Certification Exam(s) ]
    SAP [98 Certification Exam(s) ]
    SASInstitute [15 Certification Exam(s) ]
    SAT [1 Certification Exam(s) ]
    SCO [10 Certification Exam(s) ]
    SCP [6 Certification Exam(s) ]
    SDI [3 Certification Exam(s) ]
    See-Beyond [1 Certification Exam(s) ]
    Siemens [1 Certification Exam(s) ]
    Snia [7 Certification Exam(s) ]
    SOA [15 Certification Exam(s) ]
    Social-Work-Board [4 Certification Exam(s) ]
    SpringSource [1 Certification Exam(s) ]
    SUN [63 Certification Exam(s) ]
    SUSE [1 Certification Exam(s) ]
    Sybase [17 Certification Exam(s) ]
    Symantec [135 Certification Exam(s) ]
    Teacher-Certification [4 Certification Exam(s) ]
    The-Open-Group [8 Certification Exam(s) ]
    TIA [3 Certification Exam(s) ]
    Tibco [18 Certification Exam(s) ]
    Trainers [3 Certification Exam(s) ]
    Trend [1 Certification Exam(s) ]
    TruSecure [1 Certification Exam(s) ]
    USMLE [1 Certification Exam(s) ]
    VCE [6 Certification Exam(s) ]
    Veeam [2 Certification Exam(s) ]
    Veritas [33 Certification Exam(s) ]
    Vmware [58 Certification Exam(s) ]
    Wonderlic [2 Certification Exam(s) ]
    Worldatwork [2 Certification Exam(s) ]
    XML-Master [3 Certification Exam(s) ]
    Zend [6 Certification Exam(s) ]





    References :


    Dropmark : http://killexams.dropmark.com/367904/11712150
    Wordpress : http://wp.me/p7SJ6L-1gM
    Issu : https://issuu.com/trutrainers/docs/hp0-m33
    Dropmark-Text : http://killexams.dropmark.com/367904/12238706
    Blogspot : http://killexamsbraindump.blogspot.com/2017/11/pass4sure-st0-148-real-question-bank.html
    RSS Feed : http://feeds.feedburner.com/ExactlySameSt0-148QuestionsAsInRealTestWtf
    Box.net : https://app.box.com/s/oasgo7s0ttpl96is92yfzglsu2r7ov0z
    publitas.com : https://view.publitas.com/trutrainers-inc/symantec-st0-148-dumps-and-practice-tests-with-real-questions
    zoho.com : https://docs.zoho.com/file/5xjzy7b711300e8394507874472dd7f2b38ae






    Back to Main Page





    Killexams exams | Killexams certification | Pass4Sure questions and answers | Pass4sure | pass-guaratee | best test preparation | best training guides | examcollection | killexams | killexams review | killexams legit | kill example | kill example journalism | kill exams reviews | kill exam ripoff report | review | review quizlet | review login | review archives | review sheet | legitimate | legit | legitimacy | legitimation | legit check | legitimate program | legitimize | legitimate business | legitimate definition | legit site | legit online banking | legit website | legitimacy definition | pass 4 sure | pass for sure | p4s | pass4sure certification | pass4sure exam | IT certification | IT Exam | certification material provider | pass4sure login | pass4sure exams | pass4sure reviews | pass4sure aws | pass4sure security | pass4sure cisco | pass4sure coupon | pass4sure dumps | pass4sure cissp | pass4sure braindumps | pass4sure test | pass4sure torrent | pass4sure download | pass4surekey | pass4sure cap | pass4sure free | examsoft | examsoft login | exams | exams free | examsolutions | exams4pilots | examsoft download | exams questions | examslocal | exams practice |

    www.pass4surez.com | www.killcerts.com | www.search4exams.com | http://www.radionaves.com/